x220 with 750ti eGPU (EXP GDC) - Advice needed!

[Orcitect]

Sorry, posted in the wrong place somehow >.< attached contains ACPI/origin.

 

[RehabMan]

Sorry, posted in the wrong place somehow >.< attached contains ACPI/origin.

Your ACPI/patched content is out of sync with native.
Note different SystemMemory addresses:

SPEEDY-NUC:patched rehabman$ diff ../origin/ ../patched/ |grep SystemMemory
<     OperationRegion (MNVS, SystemMemory, 0xBAF9D018, 0x1000)
>     OperationRegion (MNVS, SystemMemory, 0xDAF9D018, 0x1000)
<     OperationRegion (GNVS, SystemMemory, 0xBAF3FE18, 0x01A6)
>     OperationRegion (GNVS, SystemMemory, 0xDAF3FE18, 0x01A6)
<                 OperationRegion (IGDM, SystemMemory, \ASLB, 0x2000)
>                 OperationRegion (IGDM, SystemMemory, ASLB, 0x2000)
<                     OperationRegion (ATRP, SystemMemory, \ATRB, 0x00010000)
>                     OperationRegion (ATRP, SystemMemory, ATRB, 0x00010000)

 

[Orcitect]

Thank you =]

I will look at rebuilding ACPI/patched soon. I found a post you made that mentions that /origin and /patched will become out of sync with any hardware changes, as I will not have the eGPU connected when not at my desk will mean that they will keep going out of sync...

Hm...

 

[RehabMan]

Thank you =]

I will look at rebuilding ACPI/patched soon. I found a post you made that mentions that /origin and /patched will become out of sync with any hardware changes, as I will not have the eGPU connected when not at my desk will mean that they will keep going out of sync...

Hm...

You need to capture ACPI/origin (F4 in Clover) with your intended configuration.
The alternative is to set aside patched ACPI for a while and use native, or use ACPI hotpatch (advanced though).

 

[Orcitect]

I will do some more reading and then decide. Thank you for your help!