(Working on) Z270F + i7 7700k

[mattiabrum]

Hi guys,
I want to share my partially success hackintosh.
(My build is in my profile, without radeon HD6970 because with this gpu OS X not Boot)
Partially because:
-All working, no freeze or stuck, except problem with graphic acceleration with Intel HD 630
To install I do this steps:
- at boot with usb, no flag required, only important thick usb injection and ownership in option of clover (or stuck during installation) and spoof cpu like previous post (0x0506E3 for skylake)
-afterboot using multi beast, install kext necessary (for lan intel), and using the same flag to edit config.plist
- I followed all the procedure at this thread (www.tonymacx86.com/threads/testing-thread-skylake-platform-in-os-x.176407),
but no graphic acceleration, and memory as you can see in screenshot is only 7Mb
I would be very glad to hear suggestions to improve all, thanks
I upload my config.plist and a screen with integrated intel lan working.

 

[mkuzminov]

[SUCCESS]Sierra On KabyLake H270N-WIFI[Guide]

See the "Post Installation / Graphics" section.

 

[mattiabrum]

[SUCCESS]Sierra On KabyLake H270N-WIFI[Guide]

See the "Post Installation / Graphics" section.

I have already follow and done all these steps:

Graphics
Open Clover Configurator if not open.

Add patches in DSDT
ACPI --> DSDT--> Patches --> +

• Comment: change GFX0 to IGPU
  Find: 47465830
  Replace: 49475055

Add fake ID in Device Section
Devices-->FakeID-->IntelGFX enter 0x19168086

Add ig-platform-id and intel injection in Graphics Section
Graphics-->ig-platform-id enter 0x19120000
Graphics-->Tick Inject Intel

Install Kexts using Kextbeast
Install FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext to /Library/Extensions using KextBeast.
Copy Kexts and KextBeast to desktop then Open Kextbeast.

The problem is that after all, if I tick Inject Intel in clover no boot, and system auto reboot. To boot I have to un tick Inject Intel, and sistem start, but no acceleration.

 

[mkuzminov]

Add patches in DSDT
ACPI --> DSDT--> Patches --> +

• Comment: change GFX0 to IGPU
  Find: 47465830
  Replace: 49475055

This patch is not in your configuration file

 

[mattiabrum]

This patch is not in your configuration file

first of all thanks for the help.
You have right in my old version of config there isn't, now I upload the new one and you can check. Same problem, with intel injected no boot. Without tick boot, but no acceleration.
Also I've tried to boot with my Radeon HD 6970, and it boots! but however no acceleration the first question is, why with my radeon I cannot before install from usb but now system boot? Also, do you recommend to try finish installation using integrated Intel or Radeon? Thank you.

 

[mkuzminov]

Install Kexts using Kextbeast
Install FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext to /Library/Extensions using KextBeast.
Copy Kexts and KextBeast to desktop then Open Kextbeast.

Installed?

 

[mattiabrum]

Installed?

yes bro all done

 

[mkuzminov]

Sorry, I do not have any more solutions

 

[mattiabrum]

Sorry, I do not have any more solutions

ok bro don't worry thanks anyway if someone can help I would be really appreciate

 

[jktaurus8]

ok bro don't worry thanks anyway if someone can help I would be really appreciate

in your BIOS set DVMT Pre-allocated memory to 64MB then try again.