- Joined
- Feb 6, 2013
- Messages
- 1
- Motherboard
- win
- CPU
- cpu
- Graphics
- native
- Mac
- Classic Mac
- Mobile Phone
Hi everyone,
I recently bought parts and made a new machine.
Gigabyte z77 ud5h [rev 1.1, BIOS v. F14]
i7 3770k
Corsair vengeance 2x4gb
Antec Earthwats 750
SanDisk Extreme SSD
Here is my problem:
First, I installed win 8 successfully, after about 5 minutes it starded to reboot, after reboot it would enter windows; after couple of reboots didn't reach windows at all.
I formated the SSD and tried to install win 7. After windows is loading installation files and the screen changes to Starting Windows the debug led on the motherboard changes from AE to A0, then the system restarts, every time,
I tried to change some values in bios:
-Advanced Ram settings - X.M.P. = Profile1
-SATA Mode Selection = AHCI
-XHCI mode = Auto
-XHCI hand-off and EHCI hand-off = enabled
-Wake on Lan = disabled
-HPET = enabled
-Soft-off by pwr-buttn = delay 4 seconds
-Disabled the CPU C3/C6 State
Nothing changed with or without these changes.
From Hirens BootCD, I tried MemTest, no error; mini WinXP is starting.
Tried Ubuntu CD, it was rebooting for about 7 times before reached the install, and installed successfuly.
After 10 minutes, after 5-6 crashing reboots, the things went on the same road like first Windows installation.
I want to install Win 7 on it.
Can anyone please help me ?
I recently bought parts and made a new machine.
Gigabyte z77 ud5h [rev 1.1, BIOS v. F14]
i7 3770k
Corsair vengeance 2x4gb
Antec Earthwats 750
SanDisk Extreme SSD
Here is my problem:
First, I installed win 8 successfully, after about 5 minutes it starded to reboot, after reboot it would enter windows; after couple of reboots didn't reach windows at all.
I formated the SSD and tried to install win 7. After windows is loading installation files and the screen changes to Starting Windows the debug led on the motherboard changes from AE to A0, then the system restarts, every time,
I tried to change some values in bios:
-Advanced Ram settings - X.M.P. = Profile1
-SATA Mode Selection = AHCI
-XHCI mode = Auto
-XHCI hand-off and EHCI hand-off = enabled
-Wake on Lan = disabled
-HPET = enabled
-Soft-off by pwr-buttn = delay 4 seconds
-Disabled the CPU C3/C6 State
Nothing changed with or without these changes.
From Hirens BootCD, I tried MemTest, no error; mini WinXP is starting.
Tried Ubuntu CD, it was rebooting for about 7 times before reached the install, and installed successfuly.
After 10 minutes, after 5-6 crashing reboots, the things went on the same road like first Windows installation.
I want to install Win 7 on it.
Can anyone please help me ?