WIFI 6460b with Clover does not work

[slarsah]

Upgraded from Mavericks (10.9.5) to Yosemite (10.10), and in the same operation, gone from Chameleon to Clover.

My 4530s works great with Clover and Yosemite, everything works.

BUT:
Just installed Yosemite on my 6460b with Clover following nguyenmac guide.
Everythings works great, exept WIFI. The 6460b does not find my WIFI-card (HP branded Broadcom 943224HMS).
It worked flawless in 10.9.5.

I read through the forums, ripped some hairs out and have done this:
-changed the smbios to MacBookAir5,2
-reset the EC
-taken the card in and out, with reboots in between
-upgraded the bios on the 6460b

Still no luck. Get no errors during boot, but the card is "invicible".

Any suggestions?

UPDATE-PROBLEM SOLVED:

Wiped the HD and reinstalled everything according to nguyenmac guide. Did the smbios to MacBookAir5,2 trick, and this time it worked!
Sorry for your trouble

 

[RehabMan]

Upgraded from Mavericks (10.9.5) to Yosemite (10.10), and in the same operation, gone from Chameleon to Clover.

My 4530s works great with Clover and Yosemite, everything works.

BUT:
Just installed Yosemite on my 6460b with Clover following nguyenmac guide.
Everythings works great, exept WIFI. The 6460b does not find my WIFI-card (HP branded Broadcom 943224HMS).
It worked flawless in 10.9.5.

I read through the forums, ripped some hairs out and have done this:
-changed the smbios to MacBookAir5,2
-reset the EC
-taken the card in and out, with reboots in between
-upgraded the bios on the 6460b

Still no luck. Get no errors during boot, but the card is "invicible".

Any suggestions?

Please read before asking questions.

Post #1, http://www.tonymacx86.com/hp-proboo...-install-yosemite-hp-laptops-clover-uefi.html, "Known Issues"

 

[slarsah]

Read it many times before posting. Still no luck.

 

[RehabMan]

Read it many times before posting. Still no luck.

Read the "Known Issues" section, as I wrote above...

If you've already changed the smbios, make sure the card is detected in SysPrefs->Network, interface added, and the card is turned on (button at top right keyboard deck).

 

[slarsah]

Read the "Known Issues" section, as I wrote above...

If you've already changed the smbios, make sure the card is detected in SysPrefs->Network, interface added, and the card is turned on (button at top right keyboard deck).

-cant add in sys-net. Wont show, not an option for it
-cant turn it on either, tried a million times to turn it on

Guess I'll install maverics again, just to make sure the card suddenly didn't die on me

Thanks for fast reply.

 

[RehabMan]

-cant add in sys-net. Wont show, not an option for it

Drivers are not loaded. Repair permissions & rebuild cache (check for errors).

 

[slarsah]

Drivers are not loaded. Repair permissions & rebuild cache (check for errors).

No go with that either.

I'll make a reinstall, and come back to you.

 

[slarsah]

PROBLEM SOLVED! See 1. post for update.

Thanks for help Rehabman