Ventura - Intel HD630 with DP to DVI adapter

[Wolf6660]

Hi,

I installed Venture on my HP Prodesk 600 G3 mini. Everything works, but I need a DisplayPort to DVI adapter. When I use this adapter, the screen is black. With DP to DP everything is ok.

But I used a DVI KVM switch and a new DP KVM switch costs 50€

Thanks

 

[Feartech]

Hi,

I installed Venture on my HP Prodesk 600 G3 mini. Everything works, but I need a DisplayPort to DVI adapter. When I use this adapter, the screen is black. With DP to DP everything is ok.

But I used a DVI KVM switch and a new DP KVM switch costs 50€

Thanks

please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

 

[trs96]

I installed Venture on my HP Prodesk 600 G3 mini. Everything works, but I need a DisplayPort to DVI adapter. When I use this adapter, the screen is black. With DP to DP everything is ok.

Others with this same desktop have had HD630 graphics problems. You can read about them here:

[Success] Install Ventura on the HP ProDesk 600 G3 with OC 0.8.6

I just got the G3 after reading a post from @trs96 that the G3 should be fully supported on Ventura. It has a Kaby Lake i5-7500 CPU. I created a USB map using the USBMapTool. I then followed the OC Install Guide and it all seems pretty clear, but I must be still missing something. Anyone can...

www.tonymacx86.com

 

[taskrov]

Others with this same desktop have had HD630 graphics problems. You can read about them here:

[Success] Install Ventura on the HP ProDesk 600 G3 with OC 0.8.6

I just got the G3 after reading a post from @trs96 that the G3 should be fully supported on Ventura. It has a Kaby Lake i5-7500 CPU. I created a USB map using the USBMapTool. I then followed the OC Install Guide and it all seems pretty clear, but I must be still missing something. Anyone can...

www.tonymacx86.com

Look at my last post. I needed to define the frame-buffer connectors. I used Hackintool to make to make a patch for config.plist.