VENTURA GIGABYTE Z590 VISION D

[esafeddie]

The EFI Folder I offered you was to give you a start and reach the Desktop, obviously you’d have to tweak and make adjustments to suit your own need. I had no need for Thunderbolt so the folder was not configured for it.

You need to configure the files within to what you want, ie map the USB ports and perhaps add a SSDT to include Thunderbolt.


I

 

[Rikoshet]

There are just too many things that don't work.
Every time I start it I get the message that macos was not shut down correctly.
Then Thunderbolt, RJ-45 ports, USB 3.2 Gen 2 ports do not work.
What works very well is Bluetooth and Wifi with on board hardware and sleep and wake.
After a few changes regarding Wifi and Thunderbolt, the PC no longer starts.
So your EFI was not bad for the start but too many construction sites.
I found a new EFI today and reinstalled Ventura and almost everything works except Thunderbolt, so I researched it again that should work with the SSDT-MAPLE-RIDGE-RP05-V2.aml.
What is the easiest way to test this without my system not working again?
With the install stick and do I have to do an Nvram reset first?

Would you please share the EFI folder or the source? I have the same MB. Thank you!

 

[Feartech]

Would you please share the EFI folder or the source? I have the same MB. Thank you!

post 5?

 

[Rikoshet]

post 5?

I don't think he's referring to this thread! He has many issues with the EFI from post 5...

 

[Smallersen]

Try tsankos Efi, update to latest OC version, should work.

[SUCCESS] Gigabyte Z590 VISION D + 11700K + RX 6600 XT

Fresh install of macOS Monterey Hadware Motherboard: Gigabyte GA-Z590 VISION D CPU: Intel Core i7-11700K GPU: PowerColor Radeon RX 6600 XT Red Devil 8GB RAM: 4x16GB Corsair LPX 3200 MHz DDR4 Storage 1: Corsair MP600 PCIe 4.0 1TB Storage 2: Samsung 970Evo Plus PCIe 3.0 500GB Storage 3: LSI SAS...

www.tonymacx86.com