-v error code what does it mean?

[y09ur7pr1d3]

Hi to all

I'm having trouble getting into the installer on Snow Leopard 10.6.3 to load up with iBoot and I've tried it with the command code -v to show you guys what error message I'm getting and here's what the page comes up with:

vm_page_bootstrap: 511656 free pages and 12632 wired pages
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
Kext es.osx86driver.EvOreboot - library kext com.apple.kpi.iokit not found
Can't Load Kext es.0sx86.driver.EvOreboot - failed to resolve library dependencies.
Kext es.osx86.driver.EvOreboot failed to load (0xdc00800e).
Failed to load kext es.osx86.driver.EvOreboot (error 0xdc00800e).
Couldn't alloc class "es_osx86_EvOreboot"
panic(cpu 0 caller 0xx55bfa5): "Unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1504.9.17/iokit/Kernel
/IOPlatformExpert.cpp:1389
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address (44 potential args on stack)
0x2dffbda8 : 0x21b50c (0x5d42fc 0x2dffbddc 0x223974 0x0)
0x2dffbdf8 : 0x55bfa5 (0x5ddc20 0x377b500 0x2dffbe28 0x37f5140)
0x2dffbd18 : 0x53ca9e (0x383dc00 0x37e7d80 0x1 0x4ff9d6)
0x2dffbd78 : 0x53acd3 (0x37e7d80 0x383dc00 0x37f5180 0x50389e)
0x2dffbd28 : 0x53b264 (0x37e7d80 0x37eebc0 0x8 0xffffffff)
0x2dffbd78 : 0x53cf13 (0x37e7d80 )x) 0x2dffbfac 0x1)
0x2dffbdc8 : 0x2a06cc (0x377b2d0 0x0 0xffffffff 0xffffffff

BSD process name corresponding to current thread: Unkown
MAC OS Version:
Not yet set

Kernel version
Darwin Kernel Version 10.5.0: (*date etc)*

Thats the error message I get with -v, any suggestions would be very helpfull

 

[y09ur7pr1d3]

Never mind guys I fixed this issue by setting some other AHCI mode in the BIOS and used command codes cpus=1 busratio=21 PCIRootUID=1 fixed it and now I can continue on.

 

[Khor™]

Just run with PCIRootUID=1 flag everytime u use iBoot CD. I have almost same video card as yours i can really help you. I want to notice that if something goes wrong its Vcard fault so prepare to download lots of os as 10.6.4 10.6.6 10.6.7 and apple graphic updater.
after downloaded this stuff ur ready to get ur hack-pro work fully!

 

[y09ur7pr1d3]

Thanks for the help offer, but I've already got it fully working, My card works with GraphicsEnabler=no patch and I got all my other drivers fully working with 10.6.7 and I'm enjoying the new hackintosh setup.

For those who are wondering and have the same/similiar board as mine Plug your HDD/SSD in the Red Sata port and plug and the DVD drive to the Black Sata port, and in the BIOS set 6gb sata controller to AHCI and change the hard drive configuration to AHCI and that's all for the BIOS no need for changing HPET=64 is needed since this board doesn't have that option. The Commands that will help get into the installer is cpus=1 busratio=21 PCIRootUID=1 (check in your BIOS if you're unsure of your busratio) install SL and then boot it up and you may need to use GraphicsEnabler=no command depending what card you got and then install 10.6.7 combo update with the proper drivers with muilitbeast and you're set! Hope that helped to people who have got the same/similiar board to mine as there isn't that many people who have got it working on this board.