USB Driver Changed Again - PB6

[matt77303]

Think I've got the USB3 ports licked,
Front USB 3.0 - SSP1- 0x10 XHC
SSP2 - 0x11 XHC
Rear USB 3.0 - SSP3 - 0x12 XHC
SSP4 - 0x13 XHC
SSP5 - 0x14 XHC
SSP6 - 0x15 XHC

Buggered if i can work out the USB2 ones, theres a USB Sound card connected to the rear usb2 port, step by step , how do i work that out?

Matt

PS there the USB3 ones even right?

 

[RehabMan]

Think I've got the USB3 ports licked,
Front USB 3.0 - SSP1- 0x10 XHC
SSP2 - 0x11 XHC
Rear USB 3.0 - SSP3 - 0x12 XHC
SSP4 - 0x13 XHC
SSP5 - 0x14 XHC
SSP6 - 0x15 XHC

Seems to make sense.

Buggered if i can work out the USB2 ones, theres a USB Sound card connected to the rear usb2 port, step by step , how do i work that out?

Same process, but looking at EH01/EH02 (or EHC1/EHC2 without rename).

PS there the USB3 ones even right?

Port assignments look correct. Only you can verify by inserting USB3 devices into each port.

 

[matt77303]

does this make sense?

Rear USB 2.0 -

PR11@1 - 0x01 ECH2
PR12@2 - 0x02 ECH2

Matt

 

[beastyboy]

Hi mate here it is I've got my 3t dump drive in the usb3 port has you can see its only using usb2

 

[RehabMan]

does this make sense?

Rear USB 2.0 -

PR11@1 - 0x01 ECH2
PR12@2 - 0x02 ECH2

Matt

There is no "sense"/"non-sense". It just is what it is...

 

[matt77303]

There is no "sense"/"non-sense". It just is what it is...

heres what I've got then

Front USB 3.0 - SSP1- 0x10 XHC
SSP2 - 0x11 XHC
Rear USB 3.0 - SSP3 - 0x12 XHC
SSP4 - 0x13 XHC
SSP5 - 0x14 XHC
SSP6 - 0x15 XHC


Rear USB 2.0 - PR11@1 - 0x01 ECH2
PR12@2 - 0x02 ECH2


Internal USB 2.0 Headers -
front -
PR16@6 - 0x06 ECH2
PR15@5 - 0x05 ECH2
middle -
PR13@3 - 0x03 ECH2
PR14@4 - 0x04 ECH2
back -
PR17@7 - 0x07 ECH1
PR18@8 - 0x08 ECH1


If i plug a USB2 Device into the USB3 ports, its as follows:


Front USB 3.0 - PR12@2 - 0x2 ECH1
PR11@1 - 0x1 ECH1
Rear USB 3.0 - PR16@6 - 0x6 ECH1
PR13@3 - 0x3 ECH1
PR14@4 - 0x4 ECH1
PR15@5 - 0x5 ECH1

Matt

 

[RehabMan]

Hi mate here it is I've got my 3t dump drive in the usb3 port has you can see its only using usb2

USB3 looks to be disabled.

 

[beastyboy]

Its perfect mate upgraded just before i used ioreg from yosemite and my usb3 ports were perfect pal.??? i also use clover has my bootlaoder if that helps i changed ,y bios from auto to enabled and the usb2 ports shoed has usb3 ports lol

 

[RehabMan]

Its perfect mate upgraded just before i used ioreg from yosemite and my usb3 ports were perfect pal.??? i also use clover has my bootlaoder if that helps i changed ,y bios from auto to enabled and the usb2 ports shoed has usb3 ports lol

Sorry... no idea what you just wrote.

 

[beastyboy]

Mate my usb3 ports are not disabled i just upgraded yosmite to el capitan and they no longer work