Unknown problem on install GA-Z97N-WIFI + 4770K

[tayz0n]

[SOLVED] Unknown problem on install GA-Z97N-WIFI + 4770K

Hi, im tryin to install Mavericks 10.9.5 on my config:

GA-Z97N-WIFI (bios ver F4)
Intel Core i7 4770K Haswell
1 x 4gb Curcial 1600Mhz
Intel SSD 530 240gb

I give install guis from Stork build ( http://www.tonymacx86.com/user-buil...ga-h97n-wifi-i5-4690-hd4600-two-monitors.html )

I make Unibeast 8gb drive? install mavericks 10.9.5 on it.
Set the right BIOS settings.

M.I.T. > Advanced Memory Settings > X.M.P. > Profile 1 for memory not recognized with the Default setting;
BIOS Features > Boot Options Priorities > set this to the P0 setting for the UniBeast USB thumb drive
BIOS Features > VT-d > Disable <--- for non K processors
Peripherals > Initial Display Output > IGFX <--- make sure on-board graphics is enabled
Peripherals > Intel Processor Graphics > Enable <--- likewise, make sure this is enabled
Power Management > Wake on LAN > Disable
Save & Exit > Save & Exit Setup (and the computer will reboot)

AND when i want to boot up to installer iv take fish ERROR Message
Please Help me with it

 

[tayz0n]

And one little thing - i can't find X.M.P Memory Profile in my BIOS settings...
In BIOS i have only this

 

[tayz0n]

PROBLEM SOLVED. ALL WORKS FINE!

It helps me go to install screen:

-v -x maxmem=2048 npci=0x3000 GraphicsEnabler=No