unknown cpu model and unsupported or incomplete power management

[WillDave]

every time i boot in verbose it stop at this code. what can i do to get it to get it to continue and work

code: ACPI_SMC_platformplugin::start - waitforservice(resourceMatching(appleIntelCpuPowerManagement) timed out
-- power management may be incomplete or unsupported
17.331276: ATHR: unknown locale: 21
17.348284: ATHR: unknown locale:21

I don't know what to do any help would be appreciated.

 

[Bob_the_Tomato]

I found this from another post:

in BIOS
Gigabyte GA-Z77X-UD5H
disable VT-d

Try it and see if it's the same for your board.

 

[WillDave]

I found this from another post:



Try it and see if it's the same for your board.

How do i get to that though ?

 

[UrbanBard]

He's talking about changing a setting in the BIOS. These settings should work for you.

IN BIOS, hit function key F7 for an optimized build then check to see that these are selected: SATA Selection Mode=AHCI, xHCI=auto, HPET=enabled, Init Display First=IGFX (for on-board graphics, change it to PEG if you insert the graphics card), Wake on LAN=disabled, VT-d=disabled. (if you see the latter two)

Look at your Boot Priority. Option#1 should be the drive you want to boot to. The optical drive should be last. Any other drives in between.

 

[stehor]

urbanbard u forgot to include setting igfx to 64mb shared for hd3000 and use dvi/hdmi port