Unibeast USB Keeps Rebooting

[garthtrickett]

added nullcpumangement kext now its just black screen

 

[lanhanson]

I updated by Bios and now the installer runs great! In FullHD resolution!

 

[xsier]

I updated by Bios and now the installer runs great! In FullHD resolution!

Our boards are similar, did you update to the lastest bios version, 3.20?

 

[windosX]

I Have This Same problem with reboot in installation

 

[hansnos]

I had the exact same problem as many here is describing.
I took the advice of going into bios and mess around. Pretty sure it has something with your CPU setup in bios, I solved it by enabling something in there...
well, i'm not much of an help...

 

[kiuvi583]

Hello I having the same problem reboot loop installing Maverick using Unibeast I using 16 GB PNY pend drive my system spec is.

Mainboard: Asrock G41M-VS3 R2.0
Bios Version: G41M-VS3 P1.90 (recently update)
Bios Vendor: AMIBIOS
4GB Ram
CPU: Intel E5300 2.60 GHz (64bit)
CPU Microcode Update: 1067A/A07
GPU: nVidia Geforce 8400 GS 512Mb DDR2 (64bit)

I configure Bios settings anything don't fix my problem I'm running SL only problems i have is No see video, Voodoo audio sound chipset is VIA VT1705. NEED HELP Please......

 

[doublehead]

I'm trying on a new Toshiba satellite... Latest bios, First it was giving me a safeboot error. I disabled that in the bios, now it just loads windows instantly when I boot off the chip...

This should be an adventure...