Unable to boot from HD after install.

[PGDPC]

Hi Guys,

After an otherwise painless and successful installation I am unable to get the machine to boot from HD. My setup is as below in the sig.

I used the DSDT free option in Multibeast, anyone got any better ideas.

Cheers

Paul

 

[Going Bald]

Hi Guys,

After an otherwise painless and successful installation I am unable to get the machine to boot from HD. My setup is as below in the sig.

I used the DSDT free option in Multibeast, anyone got any better ideas.

Cheers

Paul

Precisely what is meant by "unable to boot from HD"?
Boot with -v and post screen pic.

 

[PGDPC]

Precisely what is meant by "unable to boot from HD"?
Boot with -v and post screen pic.

I can only boot using the USB stick, the system will not boot from HD. Otherwise the install is spot on, LAN, Video and other hardware all seem to be working fine.

When I attempt to boot from the HD, I get a few text entries at the top left of the screen, the last on says fail. I will write them down and post them when I get to the machine.

 

[PGDPC]

Precisely what is meant by "unable to boot from HD"?
Boot with -v and post screen pic.

OK, so this is what I see if I remove the USB and leave the computer to boot from HD:

boot0:GPT
boot0:test
boot0:test
boot0:GPT
boot0:test
boot0:test
boot0:error

then nothing.

If I use the USB to selecet the OSX install it works fine.

Hope this helps

Cheers

Paul

 

[PGDPC]

Anyone?

OK, so this is what I see if I remove the USB and leave the computer to boot from HD:

boot0:GPT
boot0:test
boot0:test
boot0:GPT
boot0:test
boot0:test
boot0:error

then nothing.

If I use the USB to selecet the OSX install it works fine.

Hope this helps

Cheers

Paul

 

[wingjosh]

Using the search feature in these forums can be your best friend.

http://www.tonymacx86.com/25-boot0-error-official-guide.html

 

[PGDPC]

Thanks for that, a bit scary using the command prompt in an OS I don't know, but I'll be on it next time I'm at my desk.

Cheers

Paul

 

[PGDPC]

Using the search feature in these forums can be your best friend.

http://www.tonymacx86.com/25-boot0-error-official-guide.html

I finally got a bit of spare time and some nerve and did it, worked perfectly. Thanks for the help.

Paul