UHD 630 on MSI B360M Mortar + i5-8400 (boots to black screen)

[neilryan]

Hi Guys

I decided to go get "newer" PC parts coz I found some good deals (or so I thought) but I've been trying to get mine to work for a week now with no luck.

I ended up using rx570 just to install it successfully but I want to be able to use just the intel UHD 630. I just boots to black screen after dsmos has loaded.

right now I'm using VNC server to access the hack so I know it's booting up. it has acceleration but the resolution is just 1280x1024 (SXGA - Super eXtended Graphics Array) and this could be why both HDMI and DP port are just showing black screen.

next thing I tried was to put 0x59168086 in the Devices>IntelGFX and put 0x59120000 in the ig-platform-id in the Graphics and ticked Inject intel, which allows me to boot up with 1080p resolution but the igfx is unknown and it has no acceleration. so I think that's also wrong.

so I went back to my original settings + vnc viewer to access it, and then try the Hackintool but under connections tab, both DP port and HDMI are not even detected.

totally lost. can anyone point me to the right direction?

edit: added EFI folder

Motherboard: MSI b360m Mortar
CPU: i5 8400
Intel UHD 630 Graphics
video ports tried: DVI, HDMI and DP Port

 

[pastrychef]

Hi Guys

I decided to go get "newer" PC parts coz I found some good deals (or so I thought) but I've been trying to get mine to work for a week now with no luck.

I ended up using rx570 just to install it successfully but I want to be able to use just the intel UHD 630. I just boots to black screen after dsmos has loaded.

right now I'm using VNC server to access the hack so I know it's booting up. it has acceleration but the resolution is just 1280x1024 (SXGA - Super eXtended Graphics Array) and this could be why both HDMI and DP port are just showing black screen.

next thing I tried was to put 0x59168086 in the Devices>IntelGFX and put 0x59120000 in the ig-platform-id in the Graphics and ticked Inject intel, which allows me to boot up with 1080p resolution but the igfx is unknown and it has no acceleration. so I think that's also wrong.

so I went back to my original settings + vnc viewer to access it, and then try the Hackintool but under connections tab, both DP port and HDMI are not even detected.

totally lost. can anyone point me to the right direction?

edit: added EFI folder

Motherboard: MSI b360m Mortar
CPU: i5 8400
Intel UHD 630 Graphics
video ports tried: DVI, HDMI and DP Port

Please try this config.plist.

 

[neilryan]

Please try this config.plist.

thanks. unfortunately same result as original settings.

Resolution: 1280x1024 (SXGA - Super eXtended Graphics Array)
UI Looks like: 1280 x 1024 @ 60 Hz
Framebuffer Depth: 24-Bit Colour (ARGB8888)
Main Display: Yes
Automatically Adjust Brightness: No

 

[pastrychef]

thanks. unfortunately same result as original settings.

Resolution: 1280x1024 (SXGA - Super eXtended Graphics Array)
UI Looks like: 1280 x 1024 @ 60 Hz
Framebuffer Depth: 24-Bit Colour (ARGB8888)
Main Display: Yes
Automatically Adjust Brightness: No

Sounds like you need some patching... Please see this guide.

 

[neilryan]

Sounds like you need some patching... Please see this guide.

I was trying to do that but I got stuck at the connections part. since my HDMI and dp port are not even detected by Hackintool, idk if I can just do trial and error. will it break the hardware? coz if not, I'll just go for it

 

[pastrychef]

I was trying to do that but I got stuck at the connections part. since my HDMI and dp port are not even detected by Hackintool, idk if I can just do trial and error. will it break the hardware? coz if not, I'll just go for it

I really don't think you can do any permanent damage.