UEFI bios clear even with AppleRTC and ElliotForceLegacyRTC

[seninha]

(SOLVED) UEFI bios clear even with AppleRTC and ElliotForceLegacyRTC

I just upgraded my system with this same motherboard together with a i5 2500K.
OSX is now running next to Windows 7 64 bits after following Alfas147x guide (thanks for that).

OSX is running fine but only having two issues.

First issue:

-Sleep works but when system awakes, keyboard no longer works, and onboard LCD (Logitech G15) stays blank.Only solution is restart.

Second and most annoying issue.

-every time i start OSX my UEFI bios keeps resetting.So next time I start it up, windows comes up instead of chameleon boot loader.

I have 2 SSD attached to the GSATA3 5/6 Marvell controller.

When Windows boots up SATA PM: Samsung SSD is enabled as boot drive.
But OSX is installed on SATA PS: Samsung SSD

Thats why I need to go to Hard Drive BBS Prioritie then select SATA PS: samsung SSD.
then I need to go to boot option 1# and choose SATA PS: Samsung SSD.

View attachment 41115

But again, next time I restart my system, SATA PM: SSD is Boot Option 1 (windows drive)

I already installed AppleRTC Patch for CMOS reset AND ElliotForceLegacyRTC.
But both items did not solve the problem.


Anybody an idea how to solve this? Specially the UEFI problem

 

[seninha]

Just want to tell that problem as been solved.(who knows if somebody has the same problem)

Solution was using the Intel SATA connector instead of the Marvell I used the first time.
After I changed both SATA cables to the Intel connector, OSX SSD is now first boot device.