Thunderbolt Header 14-1 Pinout

[rio-redstone]

@NorthAmTransAm
Do you use ASUS TB4 AIC with SSDT? Do you configure USB map for TB4 USB-C port?

 

[NorthAmTransAm]

@NorthAmTransAm
Do you use ASUS TB4 AIC with SSDT? Do you configure USB map for TB4 USB-C port?

For the USB 3.0 and up you do not need to map anything. However, the 2.0 header is connected to a 2.0 header on the motherboard so you need to have that opened up and set to internal. For example, mine shows up on HS11 so I have it set to 255 in my USBMap.

My TB4 is connected to PEG1. Yours may vary so please adjust the SSDT as you see fit.

 

[rio-redstone]

@NorthAmTransAm
Thank you for your help!

But, still I have USB error...
I attached AIC, I always have the following error, and my system freeze.

kernel    000100.832163 XH03@00000000: AppleUSBHostController::setPowerStateGated: going to state 2 failed with 0xe00002d8
kernel    000100.832192 XH03@00000000: AppleUSBXHCI::interruptOccurred: interrupt while controller is unavailable _pendingInterrupts 0x00000010
kernel    000100.832220 XH03@00000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000020
kernel    000100.832260 XH03@00000000: AppleUSBXHCI::interruptOccurred: interrupt while controller is unavailable _pendingInterrupts 0x00000010
kernel    000100.832283 XH03@00000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
kernel    000100.832307 XH03@00000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery, forcing power state to on

That must be the matter of USB configuration.

How can fix this??