test & update Rehabmans [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[RandomDSdevel]

Ah, neat: near the bottom of the guide you linked, it says Sniki made and is maintaining a newer fork:

Thanks also to to @Sniki for taking up the baton and forking USBInjectAll.kext for the latest motherboard chipsets.

So, I can use that.

 

[RandomDSdevel]

May I presume it's still safe to use RehabMan's HPFanReset.efi even though it hasn't been updated since 2015, or is there a newer alternative? Maybe HP's fan control hardware is just extremely stable and hasn't changed since then, but I though I'd ask, just in case.

 

[HeatGun]

Can someone please post the correct BIOS settings for HP Elitebook 840 G5? Most of the settings listed on the #1 isn't available in my BIOS.

Thank you!

 

[RandomDSdevel]

Also, do you need VirtualSMC.efi if you're using VirtualSMC with Clover?

---

(Should I maybe be asking these questions in a different thread…?)

 

[HeatGun]

Unable to install on my HP Elitebook 840 G5.
Any advice?
I am on the latest BIOS update and using Rehabman's kext files.
Can someone share their entire working EFI folder?

 

[Feartech]

Unable to install on my HP Elitebook 840 G5.
Any advice?
I am on the latest BIOS update and using Rehabman's kext files.
Can someone share their entire working EFI folder?

after you have filled out your hardware profile properly, zip and upload your clover folder so someone can take a look

 

[HeatGun]

after you have filled out your hardware profile properly, zip and upload your clover folder so someone can take a look

Intel Core i7-8650U 1.90 GHz
Screen 14" Touchscreen
Memory 16 GB DDR4
Storage 256 GB SSD
Graphics Card Intel UHD Graphics 620
BCM94360NG WiFi Card

EFI is attached

 

[Feartech]

Intel Core i7-8650U 1.90 GHz
Screen 14" Touchscreen
Memory 16 GB DDR4
Storage 256 GB SSD
Graphics Card Intel UHD Graphics 620
BCM94360NG WiFi Card

EFI is attached

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

no idea why you are using a SMBIOS for a desktop for though?

best do the post install again

 

[HeatGun]

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

no idea why you are using a SMBIOS for a desktop for though?

best do the post-install again

I updated the profile.
Installation gets stuck at this point, all the time.
I updated the next files already.

 

[Har0n]

Hi @ll,

I would like also to hackintosh my zBook 15 G3 using opencore.
Is anybody have expierence with laptops unsing opencore?

I already use opencore with my ITX builds which works perfect.



Many thx in advance.