- Joined
- Oct 4, 2015
- Messages
- 8
- Motherboard
- AsRock Z97 Anniversary
- CPU
- i7-4790
- Graphics
- RX 470
- Mac
- Mobile Phone
Hey guys! First timer here. I feel egoistically well.
I've managed to got it working. Great guides and community!
Here is my specs, and then I want to ask about help with some issue.
________________________________________________________
Mobo: AsRock Z97 Anniversary
CPU: Intel i7 4790 (non K)
RAM: 16GB (2 x Hynix 1333Mhz & 2 Samsung 1333MHZ)
GPU: Asus Strix RX 470 8GB OC
SSD: Transcend 64GB (I have plans to move to bigger one)
Monitor: AOC 27" (Mojave shows it as 2700)
_________________________________________________________
Bios settings:
1.Load optimized settings (F9)
2.VT-d Disabled
3.Save and exit.
_________________________________________________________
After that everything booted normally (without flags), was able to install the OS by following the installation guide without problems.
After reboot at loading screen first half was normal, then the monitor flickered for a second and became violet-blueish. I've made the setup, logged in and it remained that way. I've tried many of the troubleshootings from here and non is working.
Then I've tried to swap cables (currently DVI-D(pc end) to HDMI(monitor end))
When I switched to HDMI to HDMI, the monitor stoped receiving signal, went to sleep.
So is there any chance that this inverted colors type of bs comes from the type of cable? Or should I inject something further with MB?
If you have some type of workaround, just ping me here. Thanks for your time!
I've managed to got it working. Great guides and community!
Here is my specs, and then I want to ask about help with some issue.
________________________________________________________
Mobo: AsRock Z97 Anniversary
CPU: Intel i7 4790 (non K)
RAM: 16GB (2 x Hynix 1333Mhz & 2 Samsung 1333MHZ)
GPU: Asus Strix RX 470 8GB OC
SSD: Transcend 64GB (I have plans to move to bigger one)
Monitor: AOC 27" (Mojave shows it as 2700)
_________________________________________________________
Bios settings:
1.Load optimized settings (F9)
2.VT-d Disabled
3.Save and exit.
_________________________________________________________
After that everything booted normally (without flags), was able to install the OS by following the installation guide without problems.
After reboot at loading screen first half was normal, then the monitor flickered for a second and became violet-blueish. I've made the setup, logged in and it remained that way. I've tried many of the troubleshootings from here and non is working.
Then I've tried to swap cables (currently DVI-D(pc end) to HDMI(monitor end))
When I switched to HDMI to HDMI, the monitor stoped receiving signal, went to sleep.
So is there any chance that this inverted colors type of bs comes from the type of cable? Or should I inject something further with MB?
If you have some type of workaround, just ping me here. Thanks for your time!