- Joined
- Nov 21, 2012
- Messages
- 4
- Motherboard
- win
- CPU
- intel
- Graphics
- nvidia
- Mac
- Classic Mac
- Mobile Phone
Components:
Gigabyte GA-H61M-S2PV (1155)
Core i3 - 3220
4Gb Corsair DDR3 1333Mhz
Gigabyte nVidia Gt 610 - 1Gb
Samsung 128Gb SSD
Bios:
Bios ver: FB. (year 2013)
Initial display output: PCIe
Sata mode: AHCI
LAN & Audio: On
Os Install:
I have simpe 19" lcd with only vga. So I put the VGA Cable in VGA port (not DVI. with DVI [DVI-Vga connector], after osx logon screen is blank/black ).
So, I didn't put any flags at boot at all, boot straight away by itself smootly and everything fine.
I used UniBeast USB with Yosemite, and MultiBeast for Yosemite and I change the system definition to MacPro6.1!
For the Audio (Realtek ALC887) need the Multibeast for Mavericks ver. 6.0.1! Only works whit this!
MultiBeast for Yosemite config:
MultiBeast fog Mavericks config (ONLY for AUDIO!)
Enjoy
Gigabyte GA-H61M-S2PV (1155)
Core i3 - 3220
4Gb Corsair DDR3 1333Mhz
Gigabyte nVidia Gt 610 - 1Gb
Samsung 128Gb SSD
Bios:
Bios ver: FB. (year 2013)
Initial display output: PCIe
Sata mode: AHCI
LAN & Audio: On
Os Install:
I have simpe 19" lcd with only vga. So I put the VGA Cable in VGA port (not DVI. with DVI [DVI-Vga connector], after osx logon screen is blank/black ).
So, I didn't put any flags at boot at all, boot straight away by itself smootly and everything fine.
I used UniBeast USB with Yosemite, and MultiBeast for Yosemite and I change the system definition to MacPro6.1!
For the Audio (Realtek ALC887) need the Multibeast for Mavericks ver. 6.0.1! Only works whit this!
MultiBeast for Yosemite config:
MultiBeast fog Mavericks config (ONLY for AUDIO!)
Enjoy