[SUCCESS] MSI PRO Z790-P WIFI +32Gb DDR5 + i9-13900K + Radeon RX 6800XT

[zappy39]

Hello everyone, it's good I installed the new pulpinex efi, and I managed to boot. However, I have a black screen. My graphics card is a 5700xt. Is there anything to add for this one on the efi please

Nvram boot-args = agdpmod=pikera

 

[pulpinex]

Hello everyone, it's good I installed the new pulpinex efi, and I managed to boot. However, I have a black screen. My graphics card is a 5700xt. Is there anything to add for this one on the efi please

1. Try changing DP/HDMI port
2. I’ve published many EFI for supported and unsupported card like 6750 or 6950. Be sure you used the right EFI
3. Share you EFI so I can investigate

Let me know what happen

 

[the66]

I have the same hardware as you except the graphics card. And I used your latest uefi

 

[pulpinex]

Your dGPU should works without any modification on my EFI.
Try changing port on you dgpu.
My last efi is for 6950xt.

 

[the66]

I changed ports. I click on install sonoma. I have the apple which is displayed on a blue-purple background, and as soon as the progress bar advances a little, the screen turns black

 

[pulpinex]

I changed ports. I click on install sonoma. I have the apple which is displayed on a blue-purple background, and as soon as the progress bar advances a little, the screen turns black

Share the EFI you are using please

 

[the66]

I use yours. The last one you posted

 

[pulpinex]

#79

Dear @the66
the EFI You used is for RX6950XT and Fenvi T919 Card.
It not works with your dGPU and BT/WiFi.

Try the attached one, let me know please if works.
Enjoy

 

[the66]

I have the same result.

 

[pulpinex]

If you don't provide more information, helping you becomes impossible.