[Success] i7 6700k + Asus Maximus VIII Ranger ROG (10.11.5)

[husington2016]

Hi guys can confirm successful build using 10.11.5 installation
this is because 10.11.5 natively supports skylake, and the onboard graphics

Asus ROG Maximus VIII Ranger
i7 6700k
16gb Corsair ram
530 on-board graphics (waiting for AMD polaris card)

do the following in BIOS:

PS2 Devices Support - Disabled
CSM Support - Disabled
Secure Boot - Disabled (and for UEFI boot preference select "Other Os")
XHCI Hand-Off - Enabled
Chipset: VT-D - Disabled
IOAPIC 24-119 - Disabled
Turn graphics memory to more than >64mb (i used 512)


I downloaded a full version of 10.11.5, using my previous hackintosh, and made a bootable USB using UniBeast

Everything installed fine, although first boot took much longer.

Post install

Go to MultiBeast and to get audio to work need to select both 100 series and ACL1150, after that i also ran the El Capitan sound patch (audio_clover all 1.10 patch its floating around here somewhere)
in graphics select 530
system definition select 17.1 (iMac)
network: used the IntelMausi 3.0d
did the USB fixes

 

[lucasdp]

Hey, I can't find the

audio_clover all 1.10 patch

Do you still have it? I can't make my audio to work on the same motherboard

 

[husington2016]

Hey, I can't find the

Do you still have it? I can't make my audio to work on the same motherboard

Did you try MultiBeast first?

Make sure you select both 100 series and ACL1150

 

[thebeestodcurry]

I've installed both 100 series and ALC1150 as well as the patch you have described but do not get audio... Could you go through your steps for that please?

 

[Stork]

I've installed both 100 series and ALC1150 as well as the patch you have described but do not get audio... Could you go through your steps for that please?

My Gene and MyHero build descriptions go into more detail which might help you.