- Joined
- Nov 9, 2016
- Messages
- 16
- Motherboard
- Dell Vostro V5459 / Aptio AMI Bios
- CPU
- I5-6200U
- Graphics
- Intel HD 520 + GTX930M / 1366x768
- Mobile Phone
So I've decided to make this post just because I've struggling a lot with installing NVIDIA drivers and I got so annoyed I had to reinstall OS X. I was even looking for older OS X version images, but I had only macOS Sierra and I decided to stick with it.
I want to thank @malki because I finally get it to work thank to his guide.
My setup:
i5-4460
MSI H81M-P33 (Very cheap mobo, one of the cheapest with this socket)
8GB 1600Mhz DDR3 RAM
MSI GeForce GTX 960 2GB
ADATA SP900 128GB SSD used for OS X
Crucial MX100 250GB used for Win 10
2x 1TB HDDs
Let's start with my BIOS settings:
Secure Boot - OFF
VT-d - OFF
CFG Lock - OFF
PART I
Preparing USB installer
Boot from USB and install macOS Sierra
PART III
Tweaks after installation
I want to thank @malki because I finally get it to work thank to his guide.
My setup:
i5-4460
MSI H81M-P33 (Very cheap mobo, one of the cheapest with this socket)
8GB 1600Mhz DDR3 RAM
MSI GeForce GTX 960 2GB
ADATA SP900 128GB SSD used for OS X
Crucial MX100 250GB used for Win 10
2x 1TB HDDs
Let's start with my BIOS settings:
Secure Boot - OFF
VT-d - OFF
CFG Lock - OFF
PART I
Preparing USB installer
STEP 1
Create USB installer with Unibeast -> Use second step from this guide
STEP 2
Apply some tweaks -> Third and fifth step from preinstall part
PART IICreate USB installer with Unibeast -> Use second step from this guide
STEP 2
Apply some tweaks -> Third and fifth step from preinstall part
Boot from USB and install macOS Sierra
PART III
Tweaks after installation
STEP 1
Run MultiBeast and select as shown below:
STEP 2
Mount EFI partition, open Clover Configurator (Used in PART I, STEP 2):
STEP 3
Install this NVIDIA Drivers
Your system will be rebooted after this operation
And that's it! You can now enjoy your Hackintosh (my first BTW.)Run MultiBeast and select as shown below:
Quick Start -> UEFI BOOT Mode
Drivers -> Misc -> NullCPUPowerManagement
Drivers -> Misc -> VoodooTSCSync 4 Core
Drivers -> Network -> Realtek RTL8111 v.2.2.1
USB -> 3rd Party USB 3.0
Drivers -> Misc -> NullCPUPowerManagement
Drivers -> Misc -> VoodooTSCSync 4 Core
Drivers -> Network -> Realtek RTL8111 v.2.2.1
USB -> 3rd Party USB 3.0
STEP 2
Mount EFI partition, open Clover Configurator (Used in PART I, STEP 2):
Goto Boot section and tick:
dart=0 npci=0x2000
Goto System Parameters section and tick:
NvidiaWeb
dart=0 npci=0x2000
Goto System Parameters section and tick:
NvidiaWeb
STEP 3
Install this NVIDIA Drivers
Your system will be rebooted after this operation
CAUTION!
I spend 2 days to get this and it helped me a lot
If you encounter problem with No signal after installing this drivers and using HDMI switch to DVI and it should work after booting up fully you can switch back to HDMI
I spend 2 days to get this and it helped me a lot
If you encounter problem with No signal after installing this drivers and using HDMI switch to DVI and it should work after booting up fully you can switch back to HDMI