[SUCCESS] i5-4460 / H81M-P33 / GTX 960 2GB macOS Sierra 10.12 [Finally working NVIDIA drivers]

[Aftermathx25]

So I've decided to make this post just because I've struggling a lot with installing NVIDIA drivers and I got so annoyed I had to reinstall OS X. I was even looking for older OS X version images, but I had only macOS Sierra and I decided to stick with it.

I want to thank @malki because I finally get it to work thank to his guide.

My setup:
i5-4460
MSI H81M-P33 (Very cheap mobo, one of the cheapest with this socket)
8GB 1600Mhz DDR3 RAM
MSI GeForce GTX 960 2GB
ADATA SP900 128GB SSD used for OS X
Crucial MX100 250GB used for Win 10
2x 1TB HDDs

Let's start with my BIOS settings:
Secure Boot - OFF
VT-d - OFF
CFG Lock - OFF

PART I
Preparing USB installer

STEP 1
Create USB installer with Unibeast -> Use second step from this guide

STEP 2
Apply some tweaks -> Third and fifth step from preinstall part
​

PART II
Boot from USB and install macOS Sierra

PART III
Tweaks after installation

STEP 1
Run MultiBeast and select as shown below:

Quick Start -> UEFI BOOT Mode
Drivers -> Misc -> NullCPUPowerManagement
Drivers -> Misc -> VoodooTSCSync 4 Core
Drivers -> Network -> Realtek RTL8111 v.2.2.1
USB -> 3rd Party USB 3.0​

STEP 2
Mount EFI partition, open Clover Configurator (Used in PART I, STEP 2):

Goto Boot section and tick:
dart=0 npci=0x2000
Goto System Parameters section and tick:
NvidiaWeb​

STEP 3
Install this NVIDIA Drivers
Your system will be rebooted after this operation

CAUTION!
I spend 2 days to get this and it helped me a lot
If you encounter problem with No signal after installing this drivers and using HDMI switch to DVI and it should work after booting up fully you can switch back to HDMI
​

And that's it! You can now enjoy your Hackintosh (my first BTW.)

 

[malki]

Thanks for the shoutout! Glad it's working! Posting from mine right now!

 

[agung2001]

wow, very nice man thank you so much it works
for bios settings, in my case just set to default bios setting.
if you can't find the bios setting it means your motherboard is not support the features.
ex. Vt-dff, CFG-lockff, etc.

its my first time doing hackintosh, i've got a little bit confuse with clover and unibeast.
but don't worry just follow aftermathx25 its already cover everything and that will work.

 

[tom2craft]

Good Tutoriel Thanks a lot

 

[sinenox61]

Hello, I just ordered the same motherboard that the tutorial the MSI H81M-P33 version, V2, I would like to know if with the latest version of osx High Sierra, if the tutorial will work, if someone to test, since j would like to have feedback, thank you