SUCCESS HACKINTOSH CATALINA. ASUS H310M-E R2.0, INTEL CORE I3 8100, RX580 4GB, 4GB RAM

[Ducksicoer1]

1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. CPU supports VT-d, disable it
4. system has CFG-Lock, disable it
5. system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. system has IO Serial Port, disable it
8. Save and exit.

At Clover boot screen, choose Boot macOS Install from Install macOS Catalina
When you arrive at the Installer, choose language.

you dont have issues reaching the installer,

6. For a new installation of macOS, you MUST erase and format the destination drive according to the following steps before continuing.
a. From the macOS Utilities menu, open Disk Utility
b. In upper left corner, choose View. Then Show All Devices.
c. Highlight your target drive for the Catalina installation in left column.
d. Click Erase button
e. For Name: type Catalina (You can rename it later)
f. For Format: choose APFS
g. Click Erase
h. Close Disk Utility

7. When the installer asks you where to install, choose Catalina
8. Upon completion, the system will automatically restart.
9. Press the hotkey to choose boot device (F8 for ASUS )
10. Choose USB
11. At the Boot Screen, choose Catalina
12. Complete macOS installation. The system will automatically reboot.



AND SUCCESS ALL WORKS FINE, ETHERNET, VIDEO, HDMI AUDIO,

 

[chych]

Are you able to install Clover on the main drive's EFI partition? I'm stuck at this point, I cannot mount the EFI partition, and I have to use the USB key to boot with clover. I've tried disabling SIP (through Clover boot options), and the following:

sudo spctl --master-disable
sudo mount -uw /
sudo killall Finder

But I cannot mount the EFI partition (using disktuil or clover configurator).

 

[Feartech]

Are you able to install Clover on the main drive's EFI partition? I'm stuck at this point, I cannot mount the EFI partition, and I have to use the USB key to boot with clover. I've tried disabling SIP (through Clover boot options), and the following:

sudo spctl --master-disable
sudo mount -uw /
sudo killall Finder

But I cannot mount the EFI partition (using disktuil or clover configurator).

what happens when you try and mount your EFI?

also if @Ducksicoer1 would explain what mulitbeast settings was used, that may help you as well

 

[Ducksicoer1]

Are you able to install Clover on the main drive's EFI partition? I'm stuck at this point, I cannot mount the EFI partition, and I have to use the USB key to boot with clover. I've tried disabling SIP (through Clover boot options), and the following:

sudo spctl --master-disable
sudo mount -uw /
sudo killall Finder

But I cannot mount the EFI partition (using disktuil or clover configurator).

yes im install clover EFI, use USB on board 2.0 not a 3.0, im here for any ask

 

[Feartech]

yes im install clover EFI, use USB on board 2.0 not a 3.0, im here for any ask

if you could add to your post 1 as to what mulitbeast settings you chose, that may help others

 

[Ducksicoer1]

what happens when you try and mount your EFI?

also if @Ducksicoer1 would explain what mulitbeast settings was used, that may help you as well

im only use multibeast for ethernet dirver REALTEK RTL811 V2.2.2, all devices are fine,,,, AND UEFI BOOT MODE,

 

[Feartech]

im only use multibeast for ethernet dirver REALTEK RTL811 V2.2.2, all devices are fine,,,, AND UEFI BOOT MODE,

you should add that to your post 1, it would help others when they follow it

 

[Ducksicoer1]

if you could add to your post 1 as to what mulitbeast settings you chose, that may help others

 

[chych]

what happens when you try and mount your EFI?

also if @Ducksicoer1 would explain what mulitbeast settings was used, that may help you as well

Nothing happens, and I do not get any useful error (not at hackintosh right now so can't give exact wording). Clover configurator does nothing. Diskutil just says failed to mount. Multibeast fails to install.

 

[davidmaria]

hiii,. same board without graphics card,.. struck at apple logo before entering setup,.any help,... please attach efi folder