- Joined
- Jan 10, 2011
- Messages
- 37
- Motherboard
- gigabyte
- CPU
- i5
- Graphics
- ati 5770
- Mac
- Mobile Phone
Hi all
After reading through alot in the forums and lots of testing I finally made my Rig Stabel and working.
What I did was this
Unibeast - Install onto USB ( with USB fix for 1155 Sock ) Else you get bugged icons and no Crash on USB stuff plugged in while booting.
After creating the USB stick
Whent through the BIOS settings for http://www.tonymacx86.com/99-quick-guide-configuring-uefi-gigabyte-s-7-series-lga-1155-boards.html
Followed it pretty much by the book, but disabled the Audio part and The extra SATA controller. ( since I dont use it)
Set the Boot start the onboard fyrst ( 64 MB ) and Max Memory. Had HDMI on ATI and HD4000 ( Diplayport was buggy on ATI so I did not use it )
After that I boot the usb stick and installed.
Then Booted again with USB stick , and pointed to the ML partition.
Ran MultiBeat 5.0.2
With these settings and These only!
USERDST = X
Driver-Disk-Trim Enabler = X
Driver-Misc-FakeSMC-Plugin-Motherboar = X
Driver-Misc-FakeSMC-Plugin-AMD = X
Driver-Misc-FakeSMC-Plugin-HWMon = X
Driver-Misc-Network-Maokj's = X
Customization - System Def - Mac mini = X
Customization - SSDT Option - Sandy Brige Core i5 = X
Ran and Dont Reeboot.
Patched the AppleIntelSNBGraphicsFB.Kext acording to http://www.tonymacx86.com/graphics/53925-qe-ci-hd3000-series-7-mainboards.html ( just download the Zip in post #3 and use a kext installer.
Patched The ATI5000Controller.kext Kext Acording to http://www.insanely-mac.com/forum/index.php?showtopic=262223&st=40 (to get rid of Ghost Display VGA ) ( download the ATI5000Controller.kext.zip might need to login http://www.insanely-mac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=112214 )
Replaced the smbios.plist under Extra with mine and also the org.chameleon.Boot.plist and SSDT.aml
Remember to do this last since else MultiBeast will give you the defaults and that won't work for you. So if you run it again copy these back to your Extra Folder.
I included all the files needed. Attached.
I tried the Via Onboard audio with Voodoo, however its crashed and was no fun. So I just used my SBlive-24 USB and it worked well.
Bottom 4 ( USB 3.0 ) ports dont work. ( since they are on a Via Chipset )
Top 4 USB and Front USB work fine. ( have not tried 3.0 dev though. )
Hope this helps someone.
Please post questions on the thread not PM.
After reading through alot in the forums and lots of testing I finally made my Rig Stabel and working.
What I did was this
Unibeast - Install onto USB ( with USB fix for 1155 Sock ) Else you get bugged icons and no Crash on USB stuff plugged in while booting.
After creating the USB stick
Whent through the BIOS settings for http://www.tonymacx86.com/99-quick-guide-configuring-uefi-gigabyte-s-7-series-lga-1155-boards.html
Followed it pretty much by the book, but disabled the Audio part and The extra SATA controller. ( since I dont use it)
Set the Boot start the onboard fyrst ( 64 MB ) and Max Memory. Had HDMI on ATI and HD4000 ( Diplayport was buggy on ATI so I did not use it )
After that I boot the usb stick and installed.
Then Booted again with USB stick , and pointed to the ML partition.
Ran MultiBeat 5.0.2
With these settings and These only!
USERDST = X
Driver-Disk-Trim Enabler = X
Driver-Misc-FakeSMC-Plugin-Motherboar = X
Driver-Misc-FakeSMC-Plugin-AMD = X
Driver-Misc-FakeSMC-Plugin-HWMon = X
Driver-Misc-Network-Maokj's = X
Customization - System Def - Mac mini = X
Customization - SSDT Option - Sandy Brige Core i5 = X
Ran and Dont Reeboot.
Patched the AppleIntelSNBGraphicsFB.Kext acording to http://www.tonymacx86.com/graphics/53925-qe-ci-hd3000-series-7-mainboards.html ( just download the Zip in post #3 and use a kext installer.
Patched The ATI5000Controller.kext Kext Acording to http://www.insanely-mac.com/forum/index.php?showtopic=262223&st=40 (to get rid of Ghost Display VGA ) ( download the ATI5000Controller.kext.zip might need to login http://www.insanely-mac.com/forum/index.php?app=core&module=attach§ion=attach&attach_id=112214 )
Replaced the smbios.plist under Extra with mine and also the org.chameleon.Boot.plist and SSDT.aml
Remember to do this last since else MultiBeast will give you the defaults and that won't work for you. So if you run it again copy these back to your Extra Folder.
I included all the files needed. Attached.
I tried the Via Onboard audio with Voodoo, however its crashed and was no fun. So I just used my SBlive-24 USB and it worked well.
Bottom 4 ( USB 3.0 ) ports dont work. ( since they are on a Via Chipset )
Top 4 USB and Front USB work fine. ( have not tried 3.0 dev though. )
Hope this helps someone.
Please post questions on the thread not PM.