- Joined
- Dec 5, 2013
- Messages
- 2
- Motherboard
- Z170X-Gaming7
- CPU
- i7-6700K
- Graphics
- GTX1080
- Mac
- Mobile Phone
Hello!
I installed with this way and it works fine. Cool!
PREPARE
Before you install you have to prepare these stuffs.
INSTALLATION
A. On Mac
That's all. Don't need DSDT/SSDT on this system
If I made any mistakes, please ask me to fix it. Because this is not my computer so I can't check the settings again(like config.plist)
Thank you!
I installed with this way and it works fine. Cool!
//This guide will allow to install 10.11.4 on MSI Z170 KRAIT GAMING//
So, let's get it!PREPARE
Before you install you have to prepare these stuffs.
-USB flash drive that more than 8GB
-Mac that supports 10.11(you can use hackintosh instead)
-Unibeast
-MultiBeast
-Clover(Bootloader, Configurator)
-Kext Utility
-Attached File
-NVIDIA WebDriver(need to download the same build number on your Hackintosh)
-Mac that supports 10.11(you can use hackintosh instead)
-Unibeast
-MultiBeast
-Clover(Bootloader, Configurator)
-Kext Utility
-Attached File
-NVIDIA WebDriver(need to download the same build number on your Hackintosh)
INSTALLATION
A. On Mac
1. Make install disk with Unibeast on Mac
2. After you have disk, go Clover configurator to mount EFI partition and open config.plist
3. Go SMBIOS and click magic wand
4. Click Mac Pro icon and select 'MacPro(3,1)' then click OK
5. save config.plist and remove the disk
B. Bios setting on your PC2. After you have disk, go Clover configurator to mount EFI partition and open config.plist
3. Go SMBIOS and click magic wand
4. Click Mac Pro icon and select 'MacPro(3,1)' then click OK
5. save config.plist and remove the disk
1. Load all optimal settings
2. Disable VT-d
3. Set OS Type to Other OS
C. Install OS X2. Disable VT-d
3. Set OS Type to Other OS
1. Boot with installation USB and install it
2. After installing, boot up with OS X
D. Sound, Ethernet, Graphics..2. After installing, boot up with OS X
1. Install Clover Bootloader
2. Open config.plist with Clover configurator and go Boot on left and check npci=0x3000, dart=0, nvda_drv=1, kext-dev-mode=1 on Arguments
3. Install IntelMausiEthernet.kext(Attached) with kext utility
4. Install NVIDIA WebDriver and reboot
5. Open MultiBeast and go Drivers and check ALC1150 and Optional 3 Port (5.1) Audio on Realtek ALCxxx then Build, Install it and reboot
2. Open config.plist with Clover configurator and go Boot on left and check npci=0x3000, dart=0, nvda_drv=1, kext-dev-mode=1 on Arguments
3. Install IntelMausiEthernet.kext(Attached) with kext utility
4. Install NVIDIA WebDriver and reboot
5. Open MultiBeast and go Drivers and check ALC1150 and Optional 3 Port (5.1) Audio on Realtek ALCxxx then Build, Install it and reboot
That's all. Don't need DSDT/SSDT on this system
If I made any mistakes, please ask me to fix it. Because this is not my computer so I can't check the settings again(like config.plist)
Thank you!