Stuck on final reboot with unibeast

[dazz]

hello, i've installed recently mojave on this config last month from high sierra, it all went fine

Gigabyte H97M-HD3, integrated intel video on i5 4430

during the last reboot with a fresh stick made with unbeast 10.1, OS 10.15.4 i got stuck on the apple logo
i've checked -x -v in the bootloader screen

this is the last lines i see, ,it seems stuck at apple keystore first, then i have couple more lines, then the apple logo and stays there.
thanks for your help

 

[P1LGRIM]

i've checked -x -v n the bootloader screen

Safe mode (-x) runs with a minimal set of kexts and prevents many kexts from loading which serves to complicate the diagnostic process.
Boot normally in verbose mode and post a picture of the screen when it stops.

 

[dazz]

this is without safe mode, does the same, it gets stuck first at "considerrebuild...."

 

[P1LGRIM]

it gets stuck first at "considerrebuild...."

No it doesn't - Look again.
IOConsoleUsers ...... indicates a graphics configuration problem.

At the Clover boot menu use the right arrow key to go to Options,
Graphics Injection
Select Inject Intel and change the platform ID to 0x12345678
Boot

And disable the Serial port(s) in the BIOS settings.

 

[dazz]

thank you for answers
i've disabled serial an parallel ports too i guess
i've changed the inject value

then it gets stuck, here, i don't see the apple logo anymore

 

[P1LGRIM]

Still indicating a graphics configuration issue.
Make sure that the DVMT setting is at least 64mb in the BIOS settings.
You may need to boot with -disablegfxfirmware.
How is the monitor connected ?
Have you installed Lilu.kext and WhateverGreen.kext ?

 

[dazz]

this BIOS was running mojave couple days ago.

Make sure that the DVMT setting is at least 64mb in the BIOS settings.

How is the monitor connected ?

DVI on screen, hdmi on board

Have you installed Lilu.kext and WhateverGreen.kext ?

nope


"You may need to boot with -disablegfxfirmware."
how do you do that? in previous version we could type direct on the scree, but here only checkboxes to check or not

 

[P1LGRIM]

DVI on screen, hdmi on board

Not an ideal combination.

nope

You may need to.

how do you do that?

How to Enter/Edit Boot Flags in Clover

How to Enter/Edit Boot Flags in Clover To boot OS X with common alternative boot options such as Verbose Mode, Safe Mode, Single User Mode, and Without Caches, simply hit spacebar on the Clover Boot Screen. For testing, you can enter alternate flags at boot time as follows: 1. At Clover Boot...

www.tonymacx86.com

 

[dazz]

ll