Contribute
Register

Stuck on booting to installer with intel UHD630

Status
Not open for further replies.
nepp95

nepp95

Joined
Aug 29, 2017
Messages
30
Motherboard
MSI Z370 A-PRO-Clover
CPU
i3-8100
Graphics
UHD 630 // RX 580
Hello,

I have followed the high sierra guide, and also following https://www.tonymacx86.com/threads/...4-i3-8100-ddr4-8g-m-2-ssd-high-sierra.248141/
Creating the usb went without problems. Also getting to the "installer" is fine, but then it immediately tells me it takes only 2-3 minutes and finishes after about 10 seconds and reboots.
After then trying to boot from usb, and selecting the, what should be the harddisk it has just installed to, I get the following error:

"Couldn't allocate runtime area"

With a few tries, changing some boot args, I sometimes manage to boot to the installer, written to the harddisk, but am then greeted with "Macos could not be installed to this computer. Please restart and try again"

Some things that I think might be the problem, but have no clue as to what it means or does:
-There's nothing in RT variables except for BooterConfig and CsrActiveConfig
-In SMBios there is no board number or serialnumber
-Under devices, fake-id, IntelGfx has the following value: 0x12345678

I am booting with the following args: dart=0 -v -disablegfxfirmware

My system, as per profile settings is:

MB: MSI Z370 A-PRO, bios set to settings described in the guide. Couldn't quite find the IO serial port tho.
CPU: Intel i3-8100
GPU: Integrated card, Intel uhd 630
MEM: DDR4-2666 Crucial Ballistix Sport 8GB, single module
HD: HDD 7200RPM, no ssd.

If you need more information, please tell me so.
Any help would be greatly appreciated.
 

Attachments

  • config.plist
    6.6 KB · Views: 198
  • 20180704_194801.jpg
    20180704_194801.jpg
    684.9 KB · Views: 129
  • CLOVER.zip
    1.8 MB · Views: 88
nepp95 said:
Hello,

I have followed the high sierra guide, and also following https://www.tonymacx86.com/threads/...4-i3-8100-ddr4-8g-m-2-ssd-high-sierra.248141/
Creating the usb went without problems. Also getting to the "installer" is fine, but then it immediately tells me it takes only 2-3 minutes and finishes after about 10 seconds and reboots.
After then trying to boot from usb, and selecting the, what should be the harddisk it has just installed to, I get the following error:

"Couldn't allocate runtime area"

With a few tries, changing some boot args, I sometimes manage to boot to the installer, written to the harddisk, but am then greeted with "Macos could not be installed to this computer. Please restart and try again"

Some things that I think might be the problem, but have no clue as to what it means or does:
-There's nothing in RT variables except for BooterConfig and CsrActiveConfig
-In SMBios there is no board number or serialnumber
-Under devices, fake-id, IntelGfx has the following value: 0x12345678

I am booting with the following args: dart=0 -v -disablegfxfirmware

My system, as per profile settings is:

MB: MSI Z370 A-PRO, bios set to settings described in the guide. Couldn't quite find the IO serial port tho.
CPU: Intel i3-8100
GPU: Integrated card, Intel uhd 630
MEM: DDR4-2666 Crucial Ballistix Sport 8GB, single module
HD: HDD 7200RPM, no ssd.

If you need more information, please tell me so.
Any help would be greatly appreciated.
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, your profile is missing important details. Please fix as per FAQ request.
 
Updated first post with the information you requested.
As per the details missing in profile. To which details are you referring?

I also noticed I accidentally posted this in laptop support. I have a desktop system with above specifications.
 
nepp95 said:
I also noticed I accidentally posted this in laptop support. I have a desktop system with above specifications.
Click to expand...

I will move your thread to the appropriate forum.
 
Well, booting to Mac OS Sierra worked. High Sierra never booted for me. But I am having some trouble with graphics acceleration, although trying multiple methods named on this forum. Whatever I do, graphics acceleration does not work...

Screen Shot 2018-07-22 at 16.47.38.png


0:100 0:100 MemLog inited, TSC freq: 3600502840
0:100 0:000 CPU was calibrated without ACPI PM Timer: ACPI I/O space is not enabled., use RTC
0:100 0:000
0:100 0:000 Now is 22.7.2018, 14:40:43 (GMT)
0:100 0:000 Starting Clover revision: 4173 on American Megatrends EFI
0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.12.5 | XCODE: 8.3.3]
0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,AC77CA4A-E879-4AA8-895C-1A27852CD1A7,0x28,0x64000) @87A56598
0:100 0:000 SelfDirPath = \EFI\BOOT
0:102 0:001 === [ Get Smbios ] ========================================
0:102 0:000 Type 16 Index = 0
0:102 0:000 Total Memory Slots Count = 4
0:102 0:000 Type 17 Index = 0
0:102 0:000 Ignoring insane frequency value 0MHz
0:102 0:000 SmbiosTable.Type17->Speed = 0MHz
0:102 0:000 SmbiosTable.Type17->Size = 0MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:102 0:000 SmbiosTable.Type17->Vendor = <null string>
0:102 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:102 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:102 0:000 Type 17 Index = 1
0:102 0:000 Ignoring insane frequency value 0MHz
0:102 0:000 SmbiosTable.Type17->Speed = 0MHz
0:102 0:000 SmbiosTable.Type17->Size = 0MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:102 0:000 SmbiosTable.Type17->Vendor = <null string>
0:102 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:102 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:102 0:000 Type 17 Index = 2
0:102 0:000 Ignoring insane frequency value 0MHz
0:102 0:000 SmbiosTable.Type17->Speed = 0MHz
0:102 0:000 SmbiosTable.Type17->Size = 0MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:102 0:000 SmbiosTable.Type17->Vendor = <null string>
0:102 0:000 SmbiosTable.Type17->SerialNumber = <null string>
0:102 0:000 SmbiosTable.Type17->PartNumber = <null string>
0:102 0:000 Type 17 Index = 3
0:102 0:000 SmbiosTable.Type17->Speed = 2667MHz
0:102 0:000 SmbiosTable.Type17->Size = 8192MB
0:102 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:102 0:000 SmbiosTable.Type17->Vendor = 859B
0:102 0:000 SmbiosTable.Type17->SerialNumber = D7266CD7
0:102 0:000 SmbiosTable.Type17->PartNumber = BLS8G4D26BFSBK.8FBD
0:102 0:000 Boot status=0
0:102 0:000 Running on: 'MS-7B48' with board 'Z370-A PRO (MS-7B48)'
0:102 0:000 === [ GetCPUProperties ] ==================================
0:102 0:000 CPU Vendor = 756E6547 Model=906EB
0:102 0:000 The CPU supported SSE4.1
0:102 0:000 The CPU not supported turbo
0:102 0:000 BrandString = Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz
0:102 0:000 TSC/CCC Information Leaf:
0:102 0:000 numerator : 300
0:102 0:000 denominator : 2
0:102 0:000 Calibrated ARTFrequency: 24003352
0:102 0:000 MSR 0xE2 before patch 1E000000
0:102 0:000 MSR 0xCE 00080838_F1012400
0:102 0:000 MSR 0x1A0 00850089
0:102 0:000 corrected FLEX_RATIO = 0
0:102 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:102 0:000 MaxDiv/MinDiv: 36.0/8
0:102 0:000 Turbo: 36/36/36/36
0:102 0:000 Features: 0xBFEBFBFF
0:102 0:000 Threads: 4
0:102 0:000 Cores: 4
0:102 0:000 FSB: 100 MHz
0:102 0:000 CPU: 3600 MHz
0:102 0:000 TSC: 3600 MHz
0:102 0:000 PIS: 100 MHz
0:102 0:000 ExternalClock: 25 MHz
0:102 0:000 === [ GetDevices ] ========================================
0:102 0:000 PCI (00|00:00.00) : 8086 3E1F class=060000
0:102 0:000 PCI (00|00:02.00) : 8086 3E91 class=030000
0:102 0:000 - GFX: Model=Intel Coffee Lake GT2 (Intel)
0:102 0:000 PCI (00|00:08.00) : 8086 1911 class=088000
0:102 0:000 PCI (00|00:14.00) : 8086 A2AF class=0C0330
0:102 0:000 PCI (00|00:14.02) : 8086 A2B1 class=118000
0:102 0:000 PCI (00|00:16.00) : 8086 A2BA class=078000
0:102 0:000 PCI (00|00:17.00) : 8086 A282 class=010601
0:102 0:000 PCI (00|00:1C.00) : 8086 A290 class=060400
0:102 0:000 PCI (00|00:1C.03) : 8086 A293 class=060400
0:102 0:000 PCI (00|02:00.00) : 10EC 8168 class=020000
0:102 0:000 - LAN: 0 Vendor=Realtek
0:102 0:000 PCI (00|00:1F.00) : 8086 A2C9 class=060100
0:102 0:000 PCI (00|00:1F.02) : 8086 A2A1 class=058000
0:102 0:000 PCI (00|00:1F.03) : 8086 A2F0 class=040300
0:102 0:000 PCI (00|00:1F.04) : 8086 A2A3 class=0C0500
0:102 0:000 === [ GetDefaultSettings ] ================================
0:102 0:000 Clover load options size = 0 bytes
0:170 0:068 EFI\CLOVER\config.plist loaded: Success
0:170 0:000 === [ GetListOfThemes ] ===================================
0:172 0:001 - [00]: embedded
0:210 0:038 - [00]: random
0:214 0:004 - [00]: tonymacx86
0:244 0:029 === [ Found config plists ] ===============================
0:246 0:001 - config.plist
0:247 0:000 === [ GetEarlyUserSettings ] ==============================
0:247 0:000 timeout set to 3
0:247 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:247 0:000 KextsToPatch: 4 requested
0:247 0:000 - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:247 0:000 - [01]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4
0:247 0:000 - [02]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: data len: 4
0:247 0:000 - [03]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:247 0:000 Default theme: tonymacx86
0:247 0:000 Hiding entries with string Windows
0:247 0:000 Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:247 0:000 === [ LoadDrivers ] =======================================
0:248 0:001 Loading AppleImageCodec-64.efi status=Success
0:254 0:006 Loading AppleKeyAggregator-64.efi status=Success
0:258 0:004 Loading AppleUITheme-64.efi status=Success
0:296 0:037 Loading DataHubDxe-64.efi status=Success
0:301 0:005 Loading FirmwareVolume-64.efi status=Success
0:306 0:004 Loading FSInject-64.efi status=Success
0:310 0:004 Loading OsxAptioFix2Drv-free2000.efi status=Success
0:346 0:036 Loading OsxFatBinaryDrv-64.efi status=Success
0:350 0:004 Loading SMCHelper-64.efi status=Success
0:355 0:004 Loading HFSPlus.efi status=Success
0:360 0:005 - driver needs connecting
0:360 0:000 Loading VBoxHfs-64.efi status=Success
0:393 0:032 - driver needs connecting
0:393 0:000 2 drivers needs connecting ...
0:393 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:393 0:000 HFS+ driver loaded
0:393 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:674 0:280 === [ InitScreen ] ========================================
0:674 0:000 SetScreenResolution: 1920x1080 - setting Mode 4
0:936 0:261 Video mode change to mode #4: Success
0:936 0:000 Console modes reported: 4, available modes:
0:936 0:000 - [01]: 80x25
0:936 0:000 - [02]: 80x50
0:936 0:000 - [03]: 100x31
0:936 0:000 - [04]: 128x40 (current mode)
0:936 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,AC77CA4A-E879-4AA8-895C-1A27852CD1A7,0x28,0x64000)
0:938 0:002 Using embedded font: Success
0:938 0:000 === [ GetMacAddress ] =====================================
0:938 0:000 MAC address of LAN #0= 30:9C:23:A4:FC:66:
0:938 0:000 === [ ScanSPD ] ===========================================
0:939 0:000 SMBus device : 8086 A2A3 class=0C0500 status=Success
0:939 0:000 SMBus CmdReg: 0x3
0:939 0:000 Scanning SMBus [8086:A2A3], mmio: 0xDF12A004, ioport: 0xF040, hostc: 0x1
0:939 0:000 Slots to scan [8]...
0:940 0:000 SPD[3]: Type 12 @0x53
0:957 0:017 XMP Profile1: 6*125 0 ns
0:957 0:000 Found module with XMP version 2.0
0:957 0:000 DDR speed 2666MHz
0:957 0:000 Slot: 3 Type 26 8192MB 2666MHz Vendor=Crucial Technology PartNo=BLS8G4D26BFSBK.8FBD SerialNo=0D070206060C0D07
0:958 0:000 === [ GetAcpiTablesList ] =================================
0:958 0:000 Get Acpi Tables List from RSDT:
0:958 0:000 - [00]: FACP A M I len=132
0:958 0:000 - [01]: APIC A M I len=132
0:958 0:000 - [02]: FPDT A M I len=68
0:958 0:000 - [03]: FIDT A M I len=156
0:958 0:000 - [04]: MCFG A M I len=60
0:958 0:000 - [05]: SSDT SataTabl len=931
0:958 0:000 - [06]: SSDT SaSsdt len=12630
0:958 0:000 - [07]: HPET KBL len=56
0:958 0:000 - [08]: SSDT Ther_Rvp len=4514
0:958 0:000 - [09]: SSDT xh_rvp08 len=2604
0:958 0:000 - [10]: UEFI A M I len=66
0:958 0:000 - [11]: SSDT CpuSsdt len=6062
0:958 0:000 - [12]: LPIT KBL len=148
0:958 0:000 - [13]: SSDT HdaDsp len=321
0:958 0:000 - [14]: SSDT sensrhub len=671
0:958 0:000 - [15]: SSDT PtidDevc len=12290
0:958 0:000 - [16]: SSDT TbtTypeC len=1303
0:958 0:000 - [17]: DBGP len=52
0:958 0:000 - [18]: DBG2 len=84
0:958 0:000 - [19]: DMAR KBL len=168
0:958 0:000 - [20]: BGRT A M I len=56
0:958 0:000 - [21]: WSMT A M I len=40
0:958 0:000 Calibrated TSC Frequency = 3600502840 = 3600MHz
0:958 0:000 === [ GetUserSettings ] ===================================
0:958 0:000 USB FixOwnership: yes
0:958 0:000 - final DSDT Fix mask=00000000
0:958 0:000 Use latest BiosVersion from config
0:958 0:000 BiosVersion: IM181.88Z.0157.B00.1802080917
0:958 0:000 BiosReleaseDate: 02/08/2018
0:958 0:000 ChassisType: 0x9
0:958 0:000 FirmwareFeatures: 0xFC0FE137
0:958 0:000 FirmwareFeaturesMask: 0xFF1FFF3F
0:958 0:000 PlatformFeature: 0x0
0:962 0:003 === [ ScanVolumes ] =======================================
0:962 0:000 Found 9 volumes with blockIO
0:962 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
0:962 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
0:964 0:001 Result of bootcode detection: bootable unknown (legacy)
0:964 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,AC77CA4A-E879-4AA8-895C-1A27852CD1A7,0x28,0x64000)
0:965 0:000 Result of bootcode detection: bootable unknown (legacy)
0:966 0:001 This is SelfVolume !!
0:966 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,A3B51EE3-3521-4C50-8BB5-32E76599A838,0x64028,0x25294B40)
0:967 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,AD536ED3-4490-4B92-8110-EF01341F6ECF,0x252F8B68,0x135F20)
0:968 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,04CB936F-E027-4F68-B4A3-604D2177F91A,0x800,0xF9800)
0:968 0:000 Result of bootcode detection: bootable Windows (vista,win)
0:968 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,7EE41ABE-A3F7-42BB-84B2-D1E7278FF4D3,0xFA000,0x31800)
0:969 0:000 Result of bootcode detection: bootable Windows (vista,win)
0:970 0:001 - [07]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,F1BC525D-D3DE-4C6E-A883-4D03EFB47717,0x12B800,0x8000)
0:971 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(4,GPT,8DA05518-A9DA-4A25-BB67-D82ECB0571DD,0x133800,0x1D092000)
0:971 0:000 Result of bootcode detection: bootable Windows (vista,win)
0:971 0:000 === [ InitTheme ] =========================================
0:975 0:003 Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
0:975 0:000 Loading font from ThemeDir: Error
0:977 0:001 Choosing theme tonymacx86
0:977 0:000 after NVRAM boot-args=-v dart=0
0:977 0:000 Scanning legacy ...
0:977 0:000 5: 'Recovery' (vista,win) add legacy
1:025 0:048 added 'Boot Windows from Recovery' OSType=2 Icon=vista,win
1:025 0:000 6: 'EFI' (vista,win) add legacy
1:028 0:003 added 'Boot Windows from EFI' OSType=2 Icon=vista,win
1:028 0:000 8: '' (vista,win) add legacy
1:032 0:003 added 'Boot Windows from ' OSType=2 Icon=vista,win
1:032 0:000 === [ Dump SMC keys from NVRAM ] ==========================
1:032 0:000 found AppleSMC protocol
1:126 0:094 === [ ScanLoader ] ========================================
1:126 0:000 - [02]: 'EFI'
1:136 0:009 - [03]: 'Mac'
1:173 0:036 AddLoaderEntry for Volume Name=Mac
1:179 0:006 Check if volume Is Hibernated:
1:179 0:000 Check sleep image 'by signature':
1:210 0:031 using default sleep image name = \private\var\vm\sleepimage
1:226 0:015 sleepimage not found -> Not Found
1:226 0:000 hibernated: no - sign
1:250 0:024 - [04]: 'Recovery HD'
1:251 0:000 AddLoaderEntry for Volume Name=Recovery HD
1:310 0:059 - [05]: 'Recovery'
1:310 0:000 - [06]: 'EFI'
1:320 0:009 AddLoaderEntry for Volume Name=EFI
1:324 0:004 - [08]: ''
1:324 0:000 === [ AddCustomTool ] =====================================
1:328 0:004 found tool \EFI\CLOVER\tools\Shell64U.efi
1:328 0:000 Checking EFI partition Volume 2 for Clover
1:332 0:003 Found Clover
1:356 0:024 === [ GetEfiBootDeviceFromNvram ] =========================
1:357 0:000 - found entry 3. 'Boot macOS from Mac', Volume 'Mac', DevicePath 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,A3B51EE3-3521-4C50-8BB5-32E76599A838,0x64028,0x25294B40)\System\Library\CoreServices\boot.efii'
1:357 0:000 DefaultIndex=3 and MainMenu.EntryCount=12
1:511 0:154 GUI ready
13:022 11:510 BootVariable of the entry is empty
13:022 0:000 === [ StartLoader ] =======================================
13:022 0:000 Finally: ExternalClock=25MHz BusSpeed=100013kHz CPUFreq=3601MHz PIS: hw.busfrequency=100000000Hz
13:022 0:000 Loading boot.efi status=Success
13:421 0:399 GetOSVersion: 10.12.6 (16G29)
13:421 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM
13:421 0:000 Filtering KextPatches:
13:421 0:000 - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed
13:421 0:000 - [01]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed
13:421 0:000 - [02]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed
13:421 0:000 - [03]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed
13:421 0:000 === [ PatchSmbios ] =======================================
13:421 0:000 insert table 9 for dev 0:0
13:422 0:000 Trusting SMBIOS...
13:422 0:000 Channels: 1
13:422 0:000 Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
13:422 0:000 SMBIOS Type 17 Index = 0 => 0 0:
13:422 0:000 BANK 0 DIMM0 EMPTY
13:422 0:000 SMBIOS Type 17 Index = 1 => 1 1:
13:422 0:000 BANK 0 DIMM1 EMPTY
13:422 0:000 SMBIOS Type 17 Index = 2 => 2 2:
13:422 0:000 BANK 0 DIMM2 EMPTY
13:422 0:000 partNum=BLS8G4D26BFSBK.8FBD
13:422 0:000 SMBIOS Type 17 Index = 3 => 3 3:
13:422 0:000 BANK 0 DIMM3 2667MHz 8192MB
13:422 0:000 mTotalSystemMemory = 8192
13:422 0:000 NumberOfMemoryDevices = 4
13:422 0:000 Type20[0]->End = 0x7FFFFF, Type17[3] = 0x2000
13:422 0:000 Table 131 is present, CPUType=31
13:422 0:000 Change to: 905
13:422 0:000 === [ PatchACPI ] =========================================
13:422 0:000 RSDT 0x8A597028
13:422 0:000 FADT from RSDT: 0x8A597190
13:422 0:000 XSDT 0x8A5970A8
13:422 0:000 FADT from XSDT: 0x8A5BFC18
13:422 0:000 Xsdt reallocation done
13:422 0:000 old FADT length=114
13:423 0:001 Apply DsdtFixMask=0x00000000
13:423 0:000 drop _DSM mask=0x0000
13:423 0:000 === [ FixBiosDsdt ] =======================================
13:423 0:000 VideoCard devID=0x3E918086
13:423 0:000 DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
13:423 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE
13:436 0:012 Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
13:436 0:000 first CPU found at A4B5 offset A4B8
13:436 0:000 score candidate at A4B1
13:436 0:000 score inserted in acpi_cpu_score _PR_
13:436 0:000 Found ACPI CPU: PR00 | PR01 | PR02 | PR03 | PR04 | PR05 | PR06 | PR07 | PR08 | PR09 | PR10 | PR11 | PR12 | PR13 | PR14 | PR15 , within the score: _PR_
13:437 0:000 Found PCIROOTUID = 0
13:437 0:000 === [ ACPIDropTables ] ====================================
13:437 0:000 === [ PatchAllSSDT ] ======================================
13:437 0:000 Patch table: SSDT SataTabl len=0x3A3
13:437 0:000 Patch table: SSDT SaSsdt len=0x3156
13:437 0:000 Patch table: SSDT Ther_Rvp len=0x11A2
13:437 0:000 Patch table: SSDT xh_rvp08 len=0xA2C
13:437 0:000 Patch table: SSDT CpuSsdt len=0x17AE
13:437 0:000 Patch table: SSDT HdaDsp len=0x141
13:437 0:000 Patch table: SSDT sensrhub len=0x29F
13:437 0:000 Patch table: SSDT PtidDevc len=0x3002
13:437 0:000 Patch table: SSDT TbtTypeC len=0x517
13:437 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
13:437 0:000 Xsdt has tables count=22
13:437 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
13:437 0:000 === [ RestSetup macOS ] ===================================
13:437 0:000 EdidDiscovered size=128
13:437 0:000 ------- EDID Table
13:437 0:000 000 | 00 FF FF FF FF FF FF 00 4C 2D
13:437 0:000 010 | 24 05 32 32 52 4C 22 13 01 03
13:437 0:000 020 | 80 30 1B 78 2A 38 51 A6 56 24
13:437 0:000 030 | 12 48 9A 50 54 23 08 00 81 00
13:437 0:000 040 | 81 40 81 80 95 00 A9 40 B3 00
13:437 0:000 050 | 01 01 01 01 02 3A 80 18 71 38
13:437 0:000 060 | 2D 40 58 2C 45 00 DD 0C 11 00
13:437 0:000 070 | 00 1E 00 00 00 FD 00 38 3C 1E
13:437 0:000 080 | 51 11 00 0A 20 20 20 20 20 20
13:437 0:000 090 | 00 00 00 FC 00 53 79 6E 63 4D
13:437 0:000 100 | 61 73 74 65 72 0A 20 20 00 00
13:437 0:000 110 | 00 FF 00 48 39 4D 53 38 31 32
13:437 0:000 120 | 32 38 30 0A 20 20 01 63
13:437 0:000 Intel Coffee Lake GT2 [8086:3E91] :: PciRoot(0x0)\Pci(0x2,0x0)
13:437 0:000 Found Full HD Display - 16:9 :: Width=1920 Height=1080
13:437 0:000 Beginning DualLink auto-detection
13:437 0:000 High Resolution Display
13:437 0:000 AAPL00,DualLink = 1
13:437 0:000 FakeID Intel GFX = 0x3E928086
13:437 0:000 ig-platform-id: not set
13:437 0:000 Beginning Intel GFX auto-detection with ACPI injection
13:437 0:000 Intel GFX revision = 0x0
13:437 0:000 RCBA disabled; cannot use it
13:437 0:000 setting specified layout-id=1 (0x1)
13:437 0:000 stringlength = 1574
13:437 0:000 CurrentMode: Width=1920 Height=1080
13:437 0:000 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 85B3FA18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 85B3FA18
13:447 0:010 Use origin smbios table type 1 guid.
13:461 0:013 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
13:476 0:015 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID_Intel_HD_Graphics.kext
13:510 0:033 Extra kext: EFI\CLOVER\kexts\Other\FakePCIID.kext
13:517 0:006 Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext
13:563 0:045 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
13:663 0:099 Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext
13:695 0:032 Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext
13:760 0:064 Extra kext: EFI\CLOVER\kexts\Other\IntelGraphicsFixup.kext
13:772 0:012 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
13:808 0:035 Custom boot screen not used because entry has unset use graphics

Clover folder (without themes):
Archive.zip

So it recognizes a gpu, but not really the one I have. Also graphics acceleration is not working at all.

Any help would be much appreciated...
 

Attachments

  • Archive.zip
    1.6 MB · Views: 108
Can't edit my post for some reason. Wanted to add the following:

I also added 0x3E918086 and 0x3E928086 to

/System/Library/Extensions/AppleIntelKBLGraphics.kext/Contents/Info.plist
/System/Library/Extensions/AppleIntelKBLGraphicsFramebuffer.kext/Contents/Info.plist

--EDIT--

Tried the solution from this post: https://www.tonymacx86.com/threads/...th-gfxid-injection.240585/page-6#post-1676898

Added the injector kext attached to that post and set intelGFX to 0x3E928086 with ig-platform-id 0x59160000
No graphics acceleration.

Screen Shot 2018-07-22 at 22.50.36.png
 
Last edited:
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top