Stuck On Boot Logo After 10.6.8 Update & Multibeast Install

[KingRob97]

I am looking for a new card, maybe nVIDIA GeForce GT 240

Look here for graphics cards:
http://www.tonymacx86.com/wiki/index.php/Graphics_Card_Database

List of GPUs supported by Apple:
http://www.tonymacx86.com/viewtopic.php?f=22&t=36744&hilit=His+HD+5750

10.7 Lion - Graphics Cards which work and don't:
http://www.tonymacx86.com/viewtopic.php ... phire+5770

Good luck

Thank you, I think I am going to get a navidia 210 so it will fit in my small form factor case.

 

[lynspyre]

Same problem here.
Specs are:
-MB: Gigabyte GA-P67A-UD3-B3 F7 rev1.1
-CPU: Intel Core i5 2500K
-RAM: 2x2Gb Patriot 1333Mhz
-HDD: 250Gb Samsung SATA
-Graphics: XFX AMD Radeon HD 6870 1Gb -- HD-687A-ZHFC (*I think this is guilty)
-Optical: TSSTCorp DVD+RW

First boot lines i get are in atachment. I've tried about 10 installs:
-10.6.3, MultiBeast with EasyBeast.
-10.6.3, MultiBeast with Precompiled DSDT from TonyMacX86 DSDT Database
-10.6.3, Update to 10.6.7, MultiBeast with EasyBeast.
-10.6.3, Update to 10.6.7, Precompiled DSDT.
-10.6.3, Update to 10.6.8 (Crash at update).
-10.6.3, Update to 10.6.8 (Remove IOPlatformPluginFamily.kext from S/L/E, crash at update).

Don't know what's going on here. I've tried with boot flags:
-v
-v -x
-v -x -f
-v -x -f -s

And nothing seems to work.

Previouslly i had a fully installed 10.6.8 on:
-MB: Asrock Wolfdale1333-d667 R2.0
-CPU: Intel Core2Duo E6320
-RAM: 3Gb DDR2 667Mhz
-HDD: Samsung 250Gb SATA
-Optical: TSSTCorp. DVD+RW
-Graphics: XFX GeForce 9400GT 512Mb
-DSDT: Compiled by me, succesfully patched.

Thanks in advance.,

 

[KingRob97]

Same problem here.
Specs are:
-MB: Gigabyte GA-P67A-UD3-B3 F7 rev1.1
-CPU: Intel Core i5 2500K
-RAM: 2x2Gb Patriot 1333Mhz
-HDD: 250Gb Samsung SATA
-Graphics: XFX AMD Radeon HD 6870 1Gb -- HD-687A-ZHFC (*I think this is guilty)
-Optical: TSSTCorp DVD+RW

First boot lines i get are in atachment. I've tried about 10 installs:
-10.6.3, MultiBeast with EasyBeast.
-10.6.3, MultiBeast with Precompiled DSDT from TonyMacX86 DSDT Database
-10.6.3, Update to 10.6.7, MultiBeast with EasyBeast.
-10.6.3, Update to 10.6.7, Precompiled DSDT.
-10.6.3, Update to 10.6.8 (Crash at update).
-10.6.3, Update to 10.6.8 (Remove IOPlatformPluginFamily.kext from S/L/E, crash at update).

Don't know what's going on here. I've tried with boot flags:
-v
-v -x
-v -x -f
-v -x -f -s

And nothing seems to work.

Previouslly i had a fully installed 10.6.8 on:
-MB: Asrock Wolfdale1333-d667 R2.0
-CPU: Intel Core2Duo E6320
-RAM: 3Gb DDR2 667Mhz
-HDD: Samsung 250Gb SATA
-Optical: TSSTCorp. DVD+RW
-Graphics: XFX GeForce 9400GT 512Mb
-DSDT: Compiled by me, succesfully patched.

Thanks in advance.,

Thts a total Diffrent screen then I get when I boot

 

[lynspyre]

I get stuck on "black screen" if verbose, and "Apple Logo" if non-verbose.

BTW, the screen i took is an error i saw when booting, just after ram check and cpu detect, and before start loading kexts..

 

[KingRob97]

I get stuck on "black screen" if verbose, and "Apple Logo" if non-verbose.

BTW, the screen i took is an error i saw when booting, just after ram check and cpu detect, and before start loading kexts..

Ohhhh... I am gonna try getting
A graphics card for mine... But you already have one. Idk what else it could be.

 

[Fledermaus2]

Hey, so I also have an Acer AX3950-UR30P that I've been trying to turn into a hackintosh. It has an Intel H57 express chipset (DH57JG) and integrated Intel HD graphics.

I can install Snow Leopard using my retail DVD 10.6.0 DVD, but after I do the combo update and Easybeast and try to reboot, I just get stuck at the loading screen.

At first I thought it was the motherboard that was the problem, or that I need a DSDT or different Easybeast settings... But did any of you have luck with getting a dedicated graphics card?

Is that really the problem? I've been messing around with this for two weeks and it's driving me crazy. Just wondering before I run out and buy a graphics card. If you could recommend a compatible one, that would be appreciated.

Thanks guys.

 

[KingRob97]

Hey, so I also have an Acer AX3950-UR30P that I've been trying to turn into a hackintosh. It has an Intel H57 express chipset (DH57JG) and integrated Intel HD graphics.

I can install Snow Leopard using my retail DVD 10.6.0 DVD, but after I do the combo update and Easybeast and try to reboot, I just get stuck at the loading screen.

At first I thought it was the motherboard that was the problem, or that I need a DSDT or different Easybeast settings... But did any of you have luck with getting a dedicated graphics card?

Is that really the problem? I've been messing around with this for two weeks and it's driving me crazy. Just wondering before I run out and buy a graphics card. If you could recommend a compatible one, that would be appreciated.

Thanks guys.

Here are graphics cards that are combatible and that will fit our case ( viewtopic.php?f=3&t=47765 ) and I plan on buying one next month do il let you know when I get it.

 

[Fledermaus2]

Thank you!! I'll take a look at them, and I'll let you know if I end up trying one of them out.