Stuck on apple logo installing Yosemite

[cyclemaniac3000]

Hi,
My build is stuck at the Apple logo screen and I can't figure out how to move forward.
Here's my build and shot of the screen where the computer is stuck. Any help would be greatly appreciated.
Thank you.

Build
Chip: i7-4790K
Mother board: Gigabyte z97x-gaming 7
Ram: Corsair vengeance 4x8gb
Graphics: NIVDIA GeForce GTX 760 2048 MB
Drive: Crucial MX100 2.5 SSD

Used this to get to where I am now.
-v -x PCIRootUID=0 GraphicsEnabler=No
View attachment 152979

 

[BreBo]

Try updating FakeSMC and HWSensors to latest version.

Download available here.

 

[cyclemaniac3000]

I'll try updating FakeSMC and HWSensors but I honestly don't know what that means. But I'll look it up and see what I can do.

 

[BreBo]

Did you use UniBeast/MultiBeast for your installation?

If you did, open MultiBeast and choose:

Drivers -> Misc -> FakeSMC v6.18.1394
Drivers -> Misc -> FakeSMC Plugins v6.18.1394
Drivers -> Misc -> FakeSMC HWMonitor Application v6.18.1394

 

[cyclemaniac3000]

I did use unibeast/multibeast with the config you recommended. Still no luck.



Here's where is hangs.



Any sugestions?
Thanks so much for your help.

 

[BreBo]

Did you already try other boot flags?

maxmem=16384 (your memory size divided by two) or maxmem=4096
nv_disable=1 (your GPU should have native support, but you never now)

 

[Macintyre]

Have you tried with PCIRootUID=1 or GraphicsEnabler=Yes?

 

[cyclemaniac3000]

I tried these boot flags separately and in combination but never got any further than this (see below). Any chance this might be a hardware issue?

 

[BreBo]

I'm not sure if all settings you selected in UniBeast/MultiBeast might be the cause of your problem.

Check this threat

 

[cyclemaniac3000]

O.k, I'll check it out and see if I can get the build up and running.
Thanks for the link.