Stuck at verbose mode

[lmproduction67]

Hey everyone!
I'm new in Hackintosh so I don't know how to fix some issues...
Firstly, my config (my old pc that I want to install High Sierra):
-ASUS P8H67-M LE
-intel core i5-2400
-NVIDIA GTX 650Ti (not connected for the installation)
-SSD Samsung 840 pro

I created a USB flash drive so :
-I formatted it in Mac OS X Journalised
-I mounted OSX Base System and InstallESD from the High Sierra Installation packages.
-I restored the USB using "osx Base System"
-I copied the "Packages" folder from InstallESD to the USB into "/contents/sharedsupport".
-I installed Clover (uefi version).
-I put this CLOVER folder into the USB UEFI volume https://www.dropbox.com/sh/8x2vppg83e0p8ln/AAC9TNfEdqkw96pnSSs_qTRMa?dl=0

When i tried to boot on my pc, i firstly got stuck at this verbose screen:
https://www.dropbox.com/s/bqmdrw9bitdymuj/IMG_0487.JPG?dl=0

And now i get an Error loading Kernel Cache (0x9)

I'm lost... Help would be awesome
Thanks so much!

 

[BreBo]

@lmproduction67, please update your profile (personal details) with your Motherboard, CPU and iGPU or Graphics Card.

Profiles are mandatory so that others can assist you.

 

[lmproduction67]

Sorry for the delay, but I was not there last week.
So I have MacOS High Sierra installed on my computer now, but I need to boot with the usb stick to get it working.
I installed Clover on the SSD but I don't have UEFI boot option for the SSD.
I tried to add it manually by following this :
----------------------
- To install Clover as bootable-option (needed for ASUS-boards) format an USB-stick inside Windows with a FAT32-filesystem
- Download this Shell.efi file and place it into the root of the USB-stick as Shellx64.efi (i take the Shell64.efi from clover because the link was not working).
- Reboot your system, and enter the BIOS-settings screen
- Go to Advanced Settings > Exit > Launch EFI-shell from filesystem
- The EFI-shell should now automatically load.
- Run the following commands from the EFI-shell (# ... # are just comments):
> fs0: (to go to my ssd)
> ls (to list folders and files and I have the EFI folder)

> cd \EFI\CLOVER (and it says "target is not a directory")
So I cant continue with the following :

> bcfg boot dump

> bcfg boot add 0 CLOVERX64.efi "OS X"

> bcfg boot dump

> reset
------------------------------
I don't know what to do right now :/