- Joined
- Jan 26, 2016
- Messages
- 1
- Motherboard
- MSI X99
- CPU
- Intel E5-2660v3
- Graphics
- EVGA 980 Ti SC+
- Mac
- Classic Mac
- Mobile Phone
Hi, I've been working through the thread: http://www.tonymacx86.com/el-capita...capitan-10-11-2-clover-guide-100-working.html
I am using Unibeast and Clover UEFI.
My parts are:
MSI X99 SLI Plus
EVGA GTX 980 Ti SC+
Intel Xeon E5-2660v3
G.Skill Ripsaw 32GB DDR4-2133 RAM.
Originally, I was unable to get past the first screen (with the ++++'s).
I used the flag "cpus=1" to fix this issue.
Next, I was stuck at the PCI Configuration Begin page, so I tried:
PCIRootUID=1
-x
This allowed me to get further, but it would restart before entering installer.
I have attached pictures of my config.plist files. Please let me know if there are any other things to try out!
I am using Unibeast and Clover UEFI.
My parts are:
MSI X99 SLI Plus
EVGA GTX 980 Ti SC+
Intel Xeon E5-2660v3
G.Skill Ripsaw 32GB DDR4-2133 RAM.
Originally, I was unable to get past the first screen (with the ++++'s).
I used the flag "cpus=1" to fix this issue.
Next, I was stuck at the PCI Configuration Begin page, so I tried:
PCIRootUID=1
-x
This allowed me to get further, but it would restart before entering installer.
I have attached pictures of my config.plist files. Please let me know if there are any other things to try out!