Startup Probs Ga Z68X UD3 uefi 10.11

[visamac]

Hello,

I am suffering serious problems with my board. I use OSX a couple of years on the Z68X UD3 board.
Now I installed 10.11 from scratch, firstly with clover. At the moment I updates to 10.11.2 and use the latest Multibeast.

Since the first install the system does not start properly. I use a Nvidia 630 passive cooled GC. I injected Nvidia driver. Should work oob and did so before.

The system started fine at the first attempt, after restart the system hangs after the white apple logo. I unplugged all usb stuff
Sometimes it helps when I use graphicsenebler=yes at startup. As I said Nvidia is injected an should work without this.

It appears to be a problem mit the graphic card driver on 10.11.2
Sometimes restarts works flawless. The issue is not repeatable. Sometimes ist works sometimes not. I erased the bios. switched off USB3.0.
Any idea?

Thanks for help

Regards
Tim

 

[visamac]

Solved: Startup Probs Ga Z68X UD3 uefi 10.11

Solved:
It has been a bios issue. I did not update to the latest uifi. Now with the new bios the problem is solved.
So I recommend everyone with this board to check the gigabyte homepage for updates.