SSDT 4.5 ghz OC edit

[StingRay]

Ok all I did was add 3 more states and info and then change the scope value from 27 to 30. Works fine! Just for lazy ppl Used with my i7 2600k

Note : make sure your up-to-date on fakeSMC and also under 10.7.4 this only works with macpro3,1

Currently looking into getting it going with 4,1 5,1 and imac12,2 of which only 2 pStates are active (min and max) ( (16) and (45))


SSDT.aml

 

[ramirorobles]

Re: SSDT 4.5 ghz i7 2600k OC edit

i use this SSDT but my HWMonitor read x16 running prime on bios i have 45 multiplier and 45 on each turbo any ideas how to fix it?? And i have MacPro 3.1 on description

 

[Bansaku]

Great work! You just saved me precious time my friend. Works like a charm with MacMini5,X.

MSRDumper PStatesReached: 16 28 35 41 43 45

 

[ramirorobles]

if i use macmini i get a KP at boot

 

[Blah101]

if i use macmini i get a KP at boot

Read the first post, it says it only works with MacPro 3,1.

I am going to give this a go, thanks for editing this!

 

[psydafke]

if i use macmini i get a KP at boot

Read the first post, it says it only works with MacPro 3,1.

I am going to give this a go, thanks for editing this!

Look 2 posts above yours.... Seems he got it to work on MacMini5,x

 

[StingRay]

if i use macmini i get a KP at boot

Read the first post, it says it only works with MacPro 3,1.

I am going to give this a go, thanks for editing this!

Look 2 posts above yours.... Seems he got it to work on MacMini5,x

I doubt it's the ssdt that is the cause of the KP, need info on the KP (backtrace and dependancies etc)

 

[Blah101]

Thanks for this SSDT! It worked flawlessly. Feels good to be able to clock back to 4.5 Ghz. Thanks for saving me the time!

 

[StingRay]

Thanks for this SSDT! It worked flawlessly. Feels good to be able to clock back to 4.5 Ghz. Thanks for saving me the time!

Quick question : are you using macpro3,1 ? and if so can you tell me if you AppleGraphicsPowerManagement is loaded? and if it is loaded, could you enable logging (log-control) and see if it's actually doing something ?

Just I'm experimenting at the moment

 

[psydafke]

Thanks for this SSDT! It worked flawlessly. Feels good to be able to clock back to 4.5 Ghz. Thanks for saving me the time!

Quick question : are you using macpro3,1 ? and if so can you tell me if you AppleGraphicsPowerManagement is loaded? and if it is loaded, could you enable logging (log-control) and see if it's actually doing something ?

Just I'm experimenting at the moment

By default AGPM isn't loaded with MacPro3,1 since there is no profile for MacPro3,1 in there.
Only of you i.e. copy the 4,1 to a 3,1 in the AGPMplist with thresholds, it will be loaded and funtioning.