- Joined
- Dec 21, 2013
- Messages
- 151
- Motherboard
- Gigabyte Z490 Auros Ultra
- CPU
- i9-10850K
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
Hi,
I have switched from a Z490M Gaming X to a Z490 Auros Ultra board.
For some reason my machine will no longer sleep and I get an immediate wake from sleep which I believe may be attributed to USB however my USB map seems to be fine?
Any help appreciated.
Below is my power settings
Below is my USB and ports that were originally detected when using USBInjectAll.kext in Hackintool with the XHCIPortLimit quirk. For some reason the ports marked "?" did not show up / was not injected.
I have trimmed these down below the 15 port limit as below and use the attached USBPorts.kext generated by Hackintool
Attached is my config.plist (Serial, ROM, etc removed) and below are the other kexts I load
..and these are the associated ACPI patches
I have switched from a Z490M Gaming X to a Z490 Auros Ultra board.
For some reason my machine will no longer sleep and I get an immediate wake from sleep which I believe may be attributed to USB however my USB map seems to be fine?
Code:
% log show --last boot --style syslog | fgrep "Wake reason"
2024-01-07 10:55:15.765843+0000 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XDCI PEG2 PEG3
2024-01-07 10:55:15.765847+0000 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: XDCI PEG2 PEG3
Any help appreciated.
Below is my power settings
Code:
% pmset -g
System-wide power settings:
SleepDisabled 0
Currently in use:
standby 0
Sleep On Power Button 1
womp 0
hibernatefile /var/vm/sleepimage
proximitywake 0
gpuswitch 2
powernap 0
networkoversleep 0
disksleep 10
standbydelayhigh 86400
sleep 1 (sleep prevented by sharingd)
hibernatemode 0
ttyskeepawake 1
displaysleep 10
tcpkeepalive 0
highstandbythreshold 50
standbydelaylow 86400
Below is my USB and ports that were originally detected when using USBInjectAll.kext in Hackintool with the XHCIPortLimit quirk. For some reason the ports marked "?" did not show up / was not injected.
I have trimmed these down below the 15 port limit as below and use the attached USBPorts.kext generated by Hackintool
Attached is my config.plist (Serial, ROM, etc removed) and below are the other kexts I load
Code:
AirportItlwm.kext
AppleALC.kext
AppleIGC.kext
BlueToolFixup.kext
FeatureUnlock.kext
IntelBTPatcher.kext
IntelBluetoothFirmware.kext
Lilu.kext
NVMeFix.kext
RadeonSensor.kext
RestrictEvents.kext
SMCProcessor.kext
SMCRadeonGPU.kext
SMCSuperIO.kext
USBPorts.kext
VirtualSMC.kext
WhateverGreen.kext
..and these are the associated ACPI patches
Code:
SSDT-AWAC.aml
SSDT-EC-USBX-DESKTOP.aml
SSDT-PLUG-DRTNIA.aml
Attachments
Last edited: