- Joined
- Nov 23, 2013
- Messages
- 76
- Motherboard
- GA-Z87X-UD5H
- CPU
- i7-4770K
- Graphics
- GTX 770 4 GB
- Mac
- Mobile Phone
Wow!Now that you have modified your config.plist and added your drivers and kexts, the opened flashdrive>EFI>EFI>Clover folder looks like this:View attachment 345202
The CLOVERX64.efi is actually the updated r4630 of Clover.
While you have your flash drive's EFI partition open in Clover Configurator (flashdrive>EFI>EFI -- the whole folder), drag the folder to the desktop and place it within another folder labeled "New USB EFI" or something to make clear what it is. You can close your flash drive's EFI partition. Open your boot HDD/SSD's EFI partition in Clover Configurator, and take the "EFI" folder from the "New USB EFI" folder on your desktop and add it to the HDD/SSD's EFI partition, and choose "Replace."
Frankly this is optional at least with HFS+, but it's good to have a copy on the HDD/SSD itself.
View attachment 345203
You should now be able to restart or start up, use F12, choose the UEFI version of your flash drive, from there choose the Boot macOS High Sierra from {your HDD/SSD}, and reach your desktop.
To engage your NVIDIA graphics card, assuming you need the web drivers, modify the config.plist on your flash drive's EFI>Clover by checking NvidiaWeb and unchecking Inject Intel. Install the downloaded web drivers if you need them. Shutdown and install the card. Reboot. If all is OK, copy the newly modified config.plist (or the entire flashdrive EFI folder) to your HDD/SSD's EFI partition again
I hope all this is helpful. Good luck! Please post results or comments.
Thanks a lot man! But as I wasn't seeing much help around here I decided to use the Vanilla guide from ****** and I managed to make a fresh HFS+ install on a new SDD and everything is working fine now.
Thanks again!