[Solved] The problem of freezing graphics RX 580 in the program final cut pro 10.14.1

[zankofilm]

hi all
I bought the graphics RX580 , but now it fails to freeze film when editing in final cut pro 10.14.4
Please guide
Motherboard:
Gigabyte : z97
CPU:i5 4440
graphics Sapphire Nitro+ RX 580 8g
Ram:32g

 

[macnb]

hi all
I bought the graphics RX580 , but now it fails to freeze film when editing in final cut pro 10.14.4
Please guide
Motherboard:
Gigabyte : z97
CPU:i5 4440
graphics RX580 8g
Ram:32g

Known problem.
Apple removed h/w acceleration of the codecs from RX 5xx after 10.14.1 (most likely because it does not work).
See this thread here.
With your Haswell, you should be able to get a "workaround" that relies on your CPU + IGPU.
BTW, you need to add your system details in your profile.

 

[zankofilm]

Known problem.
Apple removed h/w acceleration of the codecs from RX 5xx after 10.14.1 (most likely because it does not work).
See this thread here.
With your Haswell, you should be able to get a "workaround" that relies on your CPU + IGPU.
BTW, you need to add your system details in your profile.

I will encounter this message "video frames were dropped " when it comes to editing by final cut pro

 

[macnb]

I will encounter this message "video frames were dropped " when it comes to editing by final cut pro

Most likely as only the CPU is being used (especially if it's an i5).

 

[zankofilm]

Most likely as only the CPU is being used (especially if it's an i5).

In your opinion, the problem is the cpu
Will this problem be solved by changing CPU?

 

[macnb]

In your opinion, the problem is the cpu
Will this problem be solved by changing CPU?

Difficult to say. It could be sub-optimal configuration, lack of memory, etc.

Post your EFI folder (without the themes folder), Clover boot log (output of bdmesg command) and IOREG file (made from IOREGegistryExplorer App v2.1). And list of kexts that you are installing.

 

[zankofilm]

Difficult to say. It could be sub-optimal configuration, lack of memory, etc.

Post your EFI folder (without the themes folder), Clover boot log (output of bdmesg command) and IOREG file (made from IOREGegistryExplorer App v2.1). And list of kexts that you are installing.

I have sent all the EFi folders for you
Thank you very much for your advice

 

[macnb]

I have sent all the EFi folders for you
Thank you very much for your advice

No IOREG file to examine.

For your Haswell CPU, in config.plist try setting:
Graphics->Inject->Intel=yes
Graphics->ig-platform-id=0x04120004

 

[zankofilm]

No IOREG file to examine.

For your Haswell CPU, in config.plist try setting:
Graphics->Inject->Intel=yes
Graphics->ig-platform-id=0x04120004

what s IOREG file?

 

[macnb]

what s IOREG file?

it's macOS registry file from the attached App.
Run it, and Save File as...
...then zip and post here.