Ok?
Cheers.
cd ~/Desktop/ACPI/origin
iasl -da -dl DSDT.aml SSDT*.aml
cd ../patched
iasl -da -dl *.aml
diff ../origin ../patched |grep SystemMemory
< OperationRegion (COMP, SystemMemory, 0x8AF56018, 0x0200)
> OperationRegion (COMP, SystemMemory, 0x8B257C98, 0x0200)
Thanks for clearing, useful information as always!
Yeah,I upgraded to a larger memories from 8gb, to 16gb.and forgotten to make a fresh Acpi patch after that!
Thanks RehabMan,I followed your suggestions. So here comes files....
Sorry for late reply.Yes (specifically, all valid ig-platform-id).
How did you verify DVMT-prealloc is 128mb?
Sorry for late reply.
I tried all ig-platform-ids: 191e0000, 19160000, 19160002, 19260000, 19260002, 191b0000, 191e0003(stuck at boot)
All of them gives me 1536mb vram but the problem is still there.
"How did you verify DVMT-prealloc is 128mb?": I checked via efishell: setup_var gives me 0x02( 64mb); setup_var2 gives 0x04(128mb). I don't know which one is exactly but I can only set dvmt via setup_var2. I have re-set dvmt (just for sure): setup_var2 0x180 0x04 and its successful.
But no luck, the problem still there: I put laptop to sleep, wake it up and the built-in screen turns gray. But it visible on another display. I'm so confused.
Here is my recent problem reporting info. Please help me
Thank for your help. Updated clover.Comments:
- Why are you using MacBookPro13,2? Use MacBookPro13,1 or MacBookPro11,1.
- CPU PM not implemented
- AddHDMI_8000000 is a bad idea. Remove.
- with a larger DVMT, you can patch the framebuffer to take advantage of it (look here for clues: https://www.tonymacx86.com/threads/...lensize-patch-with-32mb-dvmt-prealloc.221506/)
Thank for your help. Updated clover.
I think my dvmt is just 64mb(setup_var return 0x02) because I can't set framebuffer, cursor bytes fit 128mb(it's cause a restart). So setup_var2 return 0x04 is something different
I also tried Lilu.kext and Intelgraphicfix.kext and EnableLidWake.kext(http://www.insanelymac.com/forum/to...ake-—-fix-lid-wake-issues-for-intel-graphics/) but still the same.
I'm researching about this thread: http://www.insanelymac.com/forum/to...id-wake-from-sleep-for-skylake-iris-graphics/ but no info for HD 520
I have attached my recent problem reporting info.
p/s: Lid also makes my built-in screen can't wake not only sleep mode.
same problem with HD520.