- Joined
- Feb 3, 2017
- Messages
- 40
- Motherboard
- MPG Z490 GAMING PLUS
- CPU
- i5-10600K
- Graphics
- GTX 780
- Mac
- Classic Mac
- Mobile Phone
Hi, I'm in success for Hackintosh on mobo ga z170x ultra gaming gigabyte, cpu i5 6600k skylake, ddr4 x 2 amount 16 gb, and gpu ati hd 5770 gigabyte oob, with 10.11.4.
So, first to post my configuration have to resolve many problems. First of all : the guidehttps://github.com/Piker-Alpha/ssdtPRGen.sh for my cpu its good but I have problem on ACPI table the result of appleintelinfo is:
AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved
Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x1fe421899f6a
MWAIT C-States.....................: 1319200
Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35) : 0x40004
MSR_PLATFORM_INFO..........(0xCE) : 0x80838F1012300
MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000006
MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x31814
IA32_MPERF.................(0xE7) : 0x9E7167E93C
IA32_APERF.................(0xE8) : 0x9F10A819FF
MSR_FLEX_RATIO.............(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.......(0x198) : 0x258B00002500
MSR_IA32_PERF_CONTROL......(0x199) : 0x2700
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88470000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x18C1
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24252627
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x1
MSR_POWER_CTL..............(0x1FC) : 0x2C005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0x42FFD0001AEA82
MSR_PKG_ENERGY_STATUS......(0x611) : 0x3B60C241
MSR_PKG_POWER_INFO.........(0x614) : 0x2F8
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x0
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x123E8443
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x8876
MSR_PKGC7_IRTL.............(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x414FF7F7AFC
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0xF7658ECBAB6
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x1FE4244EEA62
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 800 MHz
CPU Maximum non-Turbo Frequency....: 3500 MHz
CPU Maximum Turbo Frequency........: 3900 MHz
CPU P-States [ (16) 32 36 ]
CPU C3-Cores [ 0 2 ]
CPU C6-Cores [ 0 2 3 ]
CPU C7-Cores [ 2 3 ]
CPU P-States [ (16) 27 32 36 ]
CPU C3-Cores [ 0 2 3 ]
CPU P-States [ (16) 27 28 32 36 ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 1 2 3 ]
CPU P-States [ (16) 27 28 31 32 36 ]
CPU P-States [ (16) 25 27 28 31 32 36 ]
CPU P-States [ 16 25 27 28 31 32 (35) 36 ]
CPU P-States [ 16 25 27 28 31 32 35 36 (38) ]
CPU P-States [ (12) 16 25 27 28 31 32 35 36 38 ]
CPU P-States [ 12 (16) 25 27 28 31 32 34 35 36 38 ]
CPU P-States [ 12 16 25 27 28 29 31 32 34 (35) 36 38 ]
CPU P-States [ 12 (16) 22 25 27 28 29 31 32 34 35 36 38 ]
CPU P-States [ 12 (16) 22 25 27 28 29 31 32 33 34 35 36 38 ]
bash-3.2#
My problems are on wake up from sleep , usb 3.1 unknown protocol, resume with kernel panic state failed without rebooting, but more activity from cpu at 106%, extracting DSDT.aml, no error but 96 warnings and 286 opt (after correcting).
In ACPI Table missing device even 8086:191f sub ven 1458 sub dev 5000 skyline host bridge/dram register and 9086:A13A sub even 1458 sub dev 1c3a sunrise point-H CSME HECI #1
Problems on my usb are very important for my devices. My files attached : ioreg, config, DSDT and SSDT aml and dal and kernel log. I have too much limits. Thanks a lot.
So, first to post my configuration have to resolve many problems. First of all : the guidehttps://github.com/Piker-Alpha/ssdtPRGen.sh for my cpu its good but I have problem on ACPI table the result of appleintelinfo is:
AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved
Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x1fe421899f6a
MWAIT C-States.....................: 1319200
Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35) : 0x40004
MSR_PLATFORM_INFO..........(0xCE) : 0x80838F1012300
MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000006
MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x31814
IA32_MPERF.................(0xE7) : 0x9E7167E93C
IA32_APERF.................(0xE8) : 0x9F10A819FF
MSR_FLEX_RATIO.............(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.......(0x198) : 0x258B00002500
MSR_IA32_PERF_CONTROL......(0x199) : 0x2700
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88470000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x18C1
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x24252627
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x1
MSR_POWER_CTL..............(0x1FC) : 0x2C005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0x42FFD0001AEA82
MSR_PKG_ENERGY_STATUS......(0x611) : 0x3B60C241
MSR_PKG_POWER_INFO.........(0x614) : 0x2F8
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x0
MSR_PP0_POWER_LIMIT........(0x638) : 0x0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x123E8443
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_PKGC6_IRTL.............(0x60b) : 0x8876
MSR_PKGC7_IRTL.............(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x414FF7F7AFC
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0xF7658ECBAB6
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0x1FE4244EEA62
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 800 MHz
CPU Maximum non-Turbo Frequency....: 3500 MHz
CPU Maximum Turbo Frequency........: 3900 MHz
CPU P-States [ (16) 32 36 ]
CPU C3-Cores [ 0 2 ]
CPU C6-Cores [ 0 2 3 ]
CPU C7-Cores [ 2 3 ]
CPU P-States [ (16) 27 32 36 ]
CPU C3-Cores [ 0 2 3 ]
CPU P-States [ (16) 27 28 32 36 ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU C7-Cores [ 1 2 3 ]
CPU P-States [ (16) 27 28 31 32 36 ]
CPU P-States [ (16) 25 27 28 31 32 36 ]
CPU P-States [ 16 25 27 28 31 32 (35) 36 ]
CPU P-States [ 16 25 27 28 31 32 35 36 (38) ]
CPU P-States [ (12) 16 25 27 28 31 32 35 36 38 ]
CPU P-States [ 12 (16) 25 27 28 31 32 34 35 36 38 ]
CPU P-States [ 12 16 25 27 28 29 31 32 34 (35) 36 38 ]
CPU P-States [ 12 (16) 22 25 27 28 29 31 32 34 35 36 38 ]
CPU P-States [ 12 (16) 22 25 27 28 29 31 32 33 34 35 36 38 ]
bash-3.2#
My problems are on wake up from sleep , usb 3.1 unknown protocol, resume with kernel panic state failed without rebooting, but more activity from cpu at 106%, extracting DSDT.aml, no error but 96 warnings and 286 opt (after correcting).
In ACPI Table missing device even 8086:191f sub ven 1458 sub dev 5000 skyline host bridge/dram register and 9086:A13A sub even 1458 sub dev 1c3a sunrise point-H CSME HECI #1
Problems on my usb are very important for my devices. My files attached : ioreg, config, DSDT and SSDT aml and dal and kernel log. I have too much limits. Thanks a lot.
Attachments
Last edited: