- Joined
- Jan 31, 2014
- Messages
- 32
- Motherboard
- Dell Inspiron 13 5368 - Clover UEFI
- CPU
- i3-6100U
- Graphics
- HD 520, 1920x1080
I have an issue running ssdtPRGen, I have a Skyake CPU so I boot Clover with an SMBOIS of a MacBookPro13,2. Then run ssdtPRGen and get this.
That looks all good until the warning. My system doesn't boot if I use the resulting file. So I checked the contents of /S*/L*CoreServices/PlatformSupport.plist, and filtered out anything that doesn't have a Skylake CPU, it left me with MacBook9,1. It wasn't exactly ideal but I tried it anyways. I no longer get the error, and I can boot with the resulting file, but my system crashes after about one minute of being on. The Clover file includes the SSDT file generated, it is named SSDT-7.aml. The IOReg is not from when the system is booted with the generated file. The PlatformSupport.plist was never edited since it was installed.
Code:
Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookPro13,2' with board-id [Mac-66E35819EE2D0D05]
Skylake Core i3-6100U processor [0x406E3] setup [0x0905]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2300 MHz)
Number of Turbo States: 0
Number of P-States: 19 (500-2300 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: Model identifier (MacBookPro13,2) not found in..: /S*/L*/CoreServices/PlatformSupport.plist
That looks all good until the warning. My system doesn't boot if I use the resulting file. So I checked the contents of /S*/L*CoreServices/PlatformSupport.plist, and filtered out anything that doesn't have a Skylake CPU, it left me with MacBook9,1. It wasn't exactly ideal but I tried it anyways. I no longer get the error, and I can boot with the resulting file, but my system crashes after about one minute of being on. The Clover file includes the SSDT file generated, it is named SSDT-7.aml. The IOReg is not from when the system is booted with the generated file. The PlatformSupport.plist was never edited since it was installed.