[Solved] Nvidia GTX 770 Not working

[moemedimrtn]

Hy guys, i recently upgraded from GTS 250 to GTX 770. However, i cannot install ML anymore. Flags fail me. Do you know the better flag for GTX 770. Help......

 

[tonymacx86]

Nvidia GTX 770 Not working

My recommendation is to get installed, then switch to the 770 when you're all updated to 10.8.4. Make sure you use GraphicsEnabler=No.

http://www.tonymacx86.com/graphics/...7xx-kepler-cards-work-graphicsenabler-no.html

 

[moemedimrtn]

Nvidia GTX 770 Not working

It hangs at:

[PCI configuration begin]

 

[tonymacx86]

Nvidia GTX 770 Not working

I just noticed your older system try some boot flags like npci=0x3000 or a reinstall. Good luck.

 

[moemedimrtn]

Nvidia GTX 770 Not working

-f -v PCIRootUID=1 GraphicsEnabler=No

it stoped @ [PCI configuration begin], then in no time, display looses signal


-f -v npci=0x3000 PCIRootUID=1 GraphicsEnabler=No

when i thought i have finally reached success, display looses signal

 

[moemedimrtn]

Nvidia GTX 770 Not working

-v GE=NO npci=0x3000 PCIRoot=0,1,2,3,4,5


It stops@:

IO8021Controller: : dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

19.661239: ATHR: unknown locale: 21

 

[stehor]

Nvidia GTX 770 Not working

i see you have used my cheater method for root id. you have a hardware issue check out my guide to fix that http://pastebin.com/3qRSXvhm

 

[moemedimrtn]

Nvidia GTX 770 Not working

i see you have used my cheater method for root id. you have a hardware issue check out my guide to fix that http://pastebin.com/3qRSXvhm

No luck

 

[moemedimrtn]

Nvidia GTX 770 Not working

How I resolved issues when installing ML on 775 Gygabyte Board (Nvidia GTX 770)
Such as:
• Installation stopes @: [PCI configuration begin], then in no time, display looses signal
• Installation stopes @: IO8021Controller: : dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
19.661239: ATHR: unknown locale: 21

What you need:
Unibeast ML USB
USB formatted as Mac OS X Extended (journaled):
• Combo update 10.8.4
• Kext Utility
• MultiBeast 5.4.0
• org.chameleon.Boot.plist (edit it before Installing 10.8.4, otherwise you wont be able to edit it after updating)—check attchment


1. Bios Settings (Not disregarding the normal Hackintos Bios Setting)
• Advanced Chipset Features:
Onboard VGA = Always Enable
Init Display First = Onboard
Pres F10 & Save settings….
(Remove VGA cord from GTX 770 & insert it into Onboard VGA Motherboard)

2. Monitor is connected into Motherboard (GTX 770 is being disabled via Bios setting and NOT completely removed)

• Boot into Unibeast with F12….enter the ff Flags:
–v –x GE=NO npci=0x3000 PCIRoot=0,1,2,3,4,5
• Install ML

3. Install Combo Updates 10.8.4
• Boot into Unibeast with F12….SELECT ML HD DRIVE then enter the ff Flags:
–v –x GE=NO npci=0x3000 PCIRoot=0,1,2,3,4,5
• Install Combo Updates 10.8.4
• Place your working DSDT.aml on desktop.
• MultiBeast 5.4.0
➢ UserDSDT
➢ NVIDIA Retail 304.00.00f20 OpenCL Patch
• Run Kext Utility
• Replace org.chameleon.Boot.plist

4. Boot into ML HD DRIVE
• CHECK …if GTX 770 appears correctly….

5. Bios Settings
• Advanced Chipset Features:
Onboard VGA = [Enable If No Ext PEG]
Init Display First = [PEG]
Pres F10 & Save settings….
(Remove Onboard VGA cord from Motherboard & INSERT IT INTO GTX 770)
Everything is working fine…….


Thanks a lot:
stehor; xtrasteven; tonymacx86;


Thanks once more stehor with your magical Flags….

 

[Heathen]

Nvidia GTX 770 Not working

2. Monitor is connected into Motherboard (GTX 770 is being disabled via Bios setting and NOT completely removed)

Hi mate. Where exactly do You disable discrete graphics inside BIOS ? I can't find such setting inside mine.
Thanks.