[Solved] No USB3 after 10.13.4 update

[bruttonero]

Hi,
Asus Z370, i8700K, RX560 video card. EFI and extension pretty much from Pastrychef (THANKS!) latest built. Two monitors (2560x1440) one on DVI and one on DP.

Everything working well but now after upgrading to 10.13.4 no more USB 3. The ISB 3 port seem to work but a USB3 HUB is not recognized
another mixed USB3 and USB3 hub is recognized by the same cable in the same back port on MOBO.

Any help?

Thanks

Michele

 

[BreBo]

Everything working well but now after upgrading to 10.13.4 no more USB 3.

See post #84 of macOS 10.13.4 Update.

 

[bruttonero]

Thanks. It a bit better but it's not working correctly.
It only recognizes devices which are plugged in at start up.
If I plug in my iPhone to does not see it.

 

[bruttonero]

Also the USB 3 ports work as 2.0

 

[RehabMan]

Hi,
Asus Z370, i8700K, RX560 video card. EFI and extension pretty much from Pastrychef (THANKS!) latest built. Two monitors (2560x1440) one on DVI and one on DP.

Everything working well but now after upgrading to 10.13.4 no more USB 3. The ISB 3 port seem to work but a USB3 HUB is not recognized
another mixed USB3 and USB3 hub is recognized by the same cable in the same back port on MOBO.

Any help?

Thanks

Michele

Hi,
Asus Z370, i8700K, RX560 video card. EFI and extension pretty much from Pastrychef (THANKS!) latest built. Two monitors (2560x1440) one on DVI and one on DP.

Everything working well but now after upgrading to 10.13.4 no more USB 3. The ISB 3 port seem to work but a USB3 HUB is not recognized
another mixed USB3 and USB3 hub is recognized by the same cable in the same back port on MOBO.

Any help?

Thanks

Michele

Make sure your USB is configured correctly (should have been something you already did...):
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

 

[bruttonero]

Make sure your USB is configured correctly (should have been something you already did...):
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

I thought I had. I’m using the SSDT from pastry chef (same board).

What I ended up doing if follow the instructions in the OS upgrades forum and it did work.

Thanks!!!

 

[macosux]

@bruttonero did you find your solution? I also had same prob on 10.13.3 ; Later on I found out front usb 3 wasn't working only, the other back ports usb3 works fine.

 

[bruttonero]

@bruttonero did you find your solution? I also had same prob on 10.13.3 ; Later on I found out front usb 3 wasn't working only, the other back ports usb3 works fine.

Yes, I followed the instructions in the OS upgrade forum and it works now

 

[yabusa]

Yes, I followed the instructions in the OS upgrade forum and it works now

link?

 

[bruttonero]

link?

https://www.tonymacx86.com/threads/...working-for-me-in-high-sierra-upgrade.241395/

and

https://www.tonymacx86.com/threads/solved-high-sierra-10-13-4-usb-3-0-problems.250272/