- Joined
- Sep 2, 2010
- Messages
- 91
- Motherboard
- ASRock B450M Pro4
- CPU
- Ryzen 5 3600
- Graphics
- RX 580
- Mac
- Mobile Phone
Hi people 
Recently I added a third hard drive to my system in hopes of adding windows 7 to it.
The first HD has my SL install on it. The second HD has a clone copy of SL. I used this program to make the clone. (SuperDuper)
What i've done
I install Windows 7 on the third HD. Did all the windows updates etc.
I reattached the other two HD change the bios settings back to ACHI from IDE then reboot.
I started reading this guide and followed everything from this guide where it has the iBoot + multibeast icon on the page. http://tonymacx86.blogspot.com/2009/11/ ... -snow.html
I typed in my Apple_HFS Snow Leopard drive not the one from the guide.
What went wrong
After following everything, I reboot then my troubles began
I can't boot into my Primary SL drive.
a long endless list on screen scrolling testing and some other txt.
this happen after I made changes in the terminal window then reboot.
I want to revert that.
How I log into my system
On the motherboard, I make my SL clone HD connect to SATA 0. Then my primary SL HD (Which now has problems booting) connect to SATA 1, then the windows NTFS HD connect to SATA 3 and CD/DVD on SATA 4.
Once I get the boot option screen, I select My primary SL drive then everything is fine after. How can I undo if possible the changes I made in terminal so I can boot normal again?
Thanks for all your help in advance
Recently I added a third hard drive to my system in hopes of adding windows 7 to it.
The first HD has my SL install on it. The second HD has a clone copy of SL. I used this program to make the clone. (SuperDuper)
What i've done
I install Windows 7 on the third HD. Did all the windows updates etc.
I reattached the other two HD change the bios settings back to ACHI from IDE then reboot.
I started reading this guide and followed everything from this guide where it has the iBoot + multibeast icon on the page. http://tonymacx86.blogspot.com/2009/11/ ... -snow.html
I typed in my Apple_HFS Snow Leopard drive not the one from the guide.
What went wrong
After following everything, I reboot then my troubles began
I can't boot into my Primary SL drive.
a long endless list on screen scrolling testing and some other txt.
this happen after I made changes in the terminal window then reboot.
I want to revert that.
How I log into my system
On the motherboard, I make my SL clone HD connect to SATA 0. Then my primary SL HD (Which now has problems booting) connect to SATA 1, then the windows NTFS HD connect to SATA 3 and CD/DVD on SATA 4.
Once I get the boot option screen, I select My primary SL drive then everything is fine after. How can I undo if possible the changes I made in terminal so I can boot normal again?
Thanks for all your help in advance
