[solved] Internal Screen goes blank plugged into Hdmi

[longcoming]

My screen goes blank when ı plug hdmı and boot my laptop.
Hdmı screen works,but not with internal screen.
Also,hotplugging hdmı and detect display doesn't work.
I have attached my clover folder.
Any tips?

 

[RehabMan]

My screen goes blank when ı plug hdmı and boot my laptop.
Hdmı screen works,but not with internal screen.
Also,hotplugging hdmı and detect display doesn't work.
I have attached my clover folder.
Any tips?

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[longcoming]

Ok.I have uploaded the file.
Thanks in advance.

 

[longcoming]

Rehabman, could you look at my files when you are available?

 

[RehabMan]

Ok.I have uploaded the file.
Thanks in advance.

MacBookPro13,3 is a poor choice. Use MacBookPro13,1 or MacBookPro11,1.

It does not appear you patched for HDMI/HDMI-audio.
See guide:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

 

[longcoming]

MacBookPro13,3 is a poor choice. Use MacBookPro13,1 or MacBookPro11,1.

It does not appear you patched for HDMI/HDMI-audio.
See guide:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

After doing the patch you gave,hdmı works as supposed.
Thank you very much Rehabman.

 

[RehabMan]

After doing the patch you gave,hdmı works as supposed.
Thank you very much Rehabman.

Marked solved.

 

[longcoming]

My problem has returned again.
When ı plug the pc into hdmı,built in display goes blank.
I had backuped clover when ıt was working.But now that doesn't work either.
Sorry to bother you Rehabman,ı need your help again.

 

[RehabMan]

My problem has returned again.
When ı plug the pc into hdmı,built in display goes blank.
I had backuped clover when ıt was working.But now that doesn't work either.
Sorry to bother you Rehabman,ı need your help again.

See guide:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

 

[longcoming]

See guide:
https://www.tonymacx86.com/threads/...ndy-bridge-kaby-lake-and-likely-later.189495/

I already did what was told there.
I looked again.
I already used your config file which has necessary framebuffer patches.
I had done HDA-GFX injections and inserted layout ids.
Can you analyze my files.I can't see what I am doing wrong.