Contribute
Register

[SOLVED] Intel UHD 620 - turned off backlight

Status
Not open for further replies.
Joined
Aug 9, 2018
Messages
39
Motherboard
Laptop > Need make and model names > See Forum Rules!
CPU
i5-8250U
Graphics
UHD 620, 1920x1080
Hello, guys! I have a trouble with backlight - it is turning off when I close and open my laptop with connected 2nd monitor. Is anybody with the same problem?
 
RehabMan, can you say anything about it? Thanks.
 
Hello, guys! I have a trouble with backlight - it is turning off when I close and open my laptop with connected 2nd monitor. Is anybody with the same problem?
RehabMan, can you say anything about it? Thanks.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_17019.zip
    2.9 MB · Views: 120
Backlight control not implemented.
I follow your instruction step-by-step and after finish nothing changed..backlight control not appeared.
But after "kextcache -I /" I got this output:

Code:
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fb584944340 [0x7fff87b798e0]> { URL = "AppleBacklightInjector.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.AppleBacklightInjector" }

Don't know is it good or not.
 

Attachments

  • debug_4182.zip
    3 MB · Views: 73
Last edited:
I follow your instruction step-by-step and after finish nothing changed..backlight control not appeared.
But after "kextcache -I /" I got this output:

Code:
Kext with invalid signatured (-67062) allowed: <OSKext 0x7fb584944340 [0x7fff87b798e0]> { URL = "AppleBacklightInjector.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.AppleBacklightInjector" }

Don't know is it good or not.
Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

And you have the GFX0->IGPU patch disabled. That patch is required.
 
Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

And you have the GFX0->IGPU patch disabled. That patch is required.

I enable GFX0->IGPU patch. But backlight control is also invisible..(
Kext AppleBacklightInjector.kext is installed in /L/E/, but it doesn't helps in my situation.
 

Attachments

  • debug_26344.zip
    3 MB · Views: 72
I enable GFX0->IGPU patch. But backlight control is also invisible..(
Kext AppleBacklightInjector.kext is installed in /L/E/, but it doesn't helps in my situation.

Your kexts still not installed correctly (eg. no sign that FakeSMC.kext is installed).
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Don't forget to rebuild cache, then reboot as mentioned in the guide.
 
Your kexts still not installed correctly (eg. no sign that FakeSMC.kext is installed).
All kexts you need must be installed to the system volume.
When I installed FakeSMC.kext to the /L/E/ my comp stops booting on "Didn't find DPMicro"

IMG_1294.JPG


And can not boot also in recovery mode...
 
Status
Not open for further replies.
Back
Top