Contribute
Register

[solved] Intel HD 4000 Ram 16Gb. i5. SSD 2tb

Status
Not open for further replies.
HGC544

HGC544

Joined
Oct 5, 2013
Messages
147
Motherboard
HP 15-bs212
CPU
i7-7500U
Graphics
HD 620 (1366x768)
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Hi. I installed everything well. Mojave was installed on disk from USB, but when starting the first start, it starts clover and then no disk appears, only Mojave appears again.
I tried from USB.
Some help?
 
HGC544 said:
Hi. I installed everything well. Mojave was installed on disk from USB, but when starting the first start, it starts clover and then no disk appears, only Mojave appears again.
I tried from USB.
Some help?
Click to expand...

Keep in mind Mojave will force conversion to APFS on built-in SSDs.
So, if you forgot apfs.efi in drivers64UEFI, you will not see your Mojave boot targets.

Your profile is missing important details... Please fix as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
RehabMan said:
Keep in mind Mojave will force conversion to APFS on built-in SSDs.
So, if you forgot apfs.efi in drivers64UEFI, you will not see your Mojave boot targets.

Your profile is missing important details... Please fix as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Click to expand...

I have perfectly installed High Sierra 10.13.5 and the updates are installed perfectly. But with Mojave, the first start does not begin.
I have a problem, I do not know English, I'm Argentine. And I do not understand how to do the converse apfs.efi Use clover legacy in partition Efi.:cry:
 
RehabMan said:
You might check your EFI/Clover setup against the recommendations in the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Click to expand...

Hi. I tried the same installation with USB on an HDD and the problem is the same as the SSD. Mojave is installed correctly, but at the first start, it does not read the disks, but if it reads the USB to install. What will be the problem?
I also did with apfs.efi for SSD and it does not read the disks.
 
HGC544 said:
Hi. I tried the same installation with USB on an HDD and the problem is the same as the SSD. Mojave is installed correctly, but at the first start, it does not read the disks, but if it reads the USB to install. What will be the problem?
I also did with apfs.efi for SSD and it does not read the disks.
Click to expand...

I don't know what you mean by "it" nor "does not read the disks".
You will need to provide details and problem reporting files as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
RehabMan said:
I don't know what you mean by "it" nor "does not read the disks".
You will need to provide details and problem reporting files as per FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Click to expand...

Good morning. The problem was solved. You had to place apfs.efi in Driver64. But I also put it in Driver64Uefi. Works correctly. I was also able to upgrade without problems from High Sierra 10.13.5 to Mojave. Thank you very much for everything ... Mojave is spectacular, and I find it more agile and faster. :thumbup::thumbup::thumbup::D:D
 
HGC544 said:
Good morning. The problem was solved. You had to place apfs.efi in Driver64. But I also put it in Driver64Uefi. Works correctly. I was also able to upgrade without problems from High Sierra 10.13.5 to Mojave. Thank you very much for everything ... Mojave is spectacular, and I find it more agile and faster. :thumbup::thumbup::thumbup::D:D
Click to expand...


Hi HGC544,

could you post your working efi folder?

thanks.
 
MSI Z370 SLI PLUS
Z370 SLI PLUS |  i5 8600K |  RX 580 Pulse 8GB
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top