[SOLVED] INSTALLATION FROM USB LOCKS TO APPLE!

[antoniof]

Hello to all. After creating the usb stick with UniBeast, start of the installation hangs at the apple logo with loading bar to zero. L motherboard is a Asrock H170M-ITX / ac.
Help me!!!

 

[P1LGRIM]

Profiles need to contain at least your primary system to assist others with helping you

 

[BreBo]

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.

How to Enter/Edit Boot Flags in Clover

 

[antoniof]

Boot your system in Verbose Mode and post a picture of your screen when it freezes/hangs.

How to Enter/Edit Boot Flags in Clover

 

[Welos]

WE HAVE THE SAME PROBLEM!

 

[olialex]

i had the same problem and was able to solve it by ENABLING XHCI on the BIOS (Gigabyte Z170X-UD3 motherboard) and sing a USB 2.0 port for the pen-drive. i hope this simple solution helps you too!

 

[antoniof]

i had the same problem and was able to solve it by ENABLING XHCI on the BIOS (Gigabyte Z170X-UD3 motherboard) and sing a USB 2.0 port for the pen-drive. i hope this simple solution helps you too!

I resolved it by update BIOS and ENABLING XHCI

 

[djrven]

I resolved it by update BIOS and ENABLING XHCI

Hi antoniof, were you able to finish your hack using the ASRock H170M-ITX, my case I plan to use the non wifi model(DL), I'd appreciate whether you have any advice regarding this mobo, is it possible to finish this hack following the tonymac guide only? or Do I need to reach other ketxs, aml, plist files? thanks in advance!