[Solved] HELP - ssd not booting Sierra after installation

[P1LGRIM]

Great all done and working.

The only thing Im noticing is that my Graphics displays "Intel HD Graphics 7000 6mb" instead of 530 as Im using an Intel i7 6700 with integrated 530 graphics. Does it even matter what its displaying as?

Can I change this without using multibeast?

It's ok to use MultiBeast to fix that.

 

[Fickle-Chris-91]

I have just done this action and now upon restart again it does not boot from the SSD

Im sure I have followed everything right. Do you think running multibeast changed what I have done with the EFI???

 

[P1LGRIM]

Do you think running multibeast changed what I have done with the EFI???

That is what it is supposed to do although it is not meant to leave you in an unbootable state.
MultiBeast tells you what it is doing at the bottom of the app window.

 

[P1LGRIM]

Boot in verbose mode and post a picture of the screen when it stops. Then boot from the USB and undo what you just did by replacing the /EFI folder again then attach your config.plist here.

 

[Fickle-Chris-91]

This is the config when booted in Verbose mode.

 

[P1LGRIM]

This is the config when booted in Verbose mode.

That's nonsense, the config is the same if you boot in verbose mode or not.

Try this edited version :

 

[Fickle-Chris-91]

This is what is read when I replaced my Config.plist with the one you attached.

 

[P1LGRIM]

This is what is read when I replaced my Config.plist with the one you attached.

Which version of Clover is that booting from ?

 

[Fickle-Chris-91]

I'm using all the Unibeast and Multibeast and clover from whatever the latest install on the tony Mac site is giving me.

It says in clover menu:

Clover 2.4k rev 4045

 

[P1LGRIM]

I'm using all the Unibeast and Multibeast and clover from whatever the latest install on the tony Mac site is giving me.

It says in clover menu:

Clover 2.4k rev 4045

When you boot with Clover it tells you which version in the bottom right corner of the screen.
You should consider upgrading to the latest version.

Have you installed Lilu.kext and IntelGraphicsFixup.kext ?

There are changes to the new 10.12.5 Intel graphics drivers which may cause black screen or hang on boot.
Try to boot with an invalid ig-platform-id (0x12345678).
At Clover Boot Screen select Options > Graphics Injector > FakeID
When you reach the desktop, install the kexts (Lilu.kext, IntelGraphicsFixup.kext) to /Library/Extensions using KextBeast.