[Solved] challenge with hackintosh i5 7600k gtx 1060 6gb and ga z270 gaming k3

[kkechan]

Hi i have a new desktop hardware and i dont know how start with this:
the hardware is:
-i5 7600k
- ga z270 gaming k3
- 16gb ddr4
- gigabyte gtx 1060 6gb
I know that the hardware its so new and dont have apple support, do you think it is posible right now thanks at all

 

[BreBo]

I know that the hardware its so new and dont have apple support, do you think it is posible right now thanks at all

Yes, check and use the following guides:
UniBeast: Install macOS Sierra on Any Supported Intel-based PC guide
[NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

 

[kkechan]

[CITA = "BreBo, mensaje: 1509461, miembro de: 239040"] Sí, comprobar y utilizar las siguientes guías:
UniBeast: Instalar macOS Sierra en cualquier guía de PC basado en Intel soportados
[NUEVO / PRUEBA] CPU Intel 7ª generación Kaby Lago + 200 de la serie Placas base en macOS [/ quote]

Graciasfor asking, the problem is that didnt boot maybe for gtx 1060??

 

[Superbogey]

[CITA = "BreBo, mensaje: 1509461, miembro de: 239040"] Sí, comprobar y utilizar las siguientes guías:
UniBeast: Instalar macOS Sierra en cualquier guía de PC basado en Intel soportados
[NUEVO / PRUEBA] CPU Intel 7ª generación Kaby Lago + 200 de la serie Placas base en macOS [/ quote]

Graciasfor asking, the problem is that didnt boot maybe for gtx 1060??

I have almost an identical build as yours (Gaming K7 instead of K3 and 3MB 1060 instead of 6). Except for an error on my part, I managed to get 10.12.4 running successfully (and now updated to 10.12.5). Make sure and follow the guides that @BreBo linked above and you should be able to get your system running without a problem.

 

[kkechan]

I have almost an identical build as yours (Gaming K7 instead of K3 and 3MB 1060 instead of 6). Except for an error on my part, I managed to get 10.12.4 running successfully (and now updated to 10.12.5). Make sure and follow the guides that @BreBo linked above and you should be able to get your system running without a problem.

Ok i will retry well, ive got a question, i must boot with some special boot arg for gtx 1060?? o something or it will boot normal

 

[kkechan]

I have almost an identical build as yours (Gaming K7 instead of K3 and 3MB 1060 instead of 6). Except for an error on my part, I managed to get 10.12.4 running successfully (and now updated to 10.12.5). Make sure and follow the guides that @BreBo linked above and you should be able to get your system running without a problem.

Hi I just try it like 20 times and imposible for me thats what i do and the result. thanks for help. Do you have any idea of problem thanks @RehabMan @tonymacx86

 

[BreBo]

Hi I just try it like 20 times and imposible for me thats what i do and the result. thanks for help. Do you have any idea of problem thanks

At Clover Boot Screen select Options > PCI devices > USB Ownership and USB Injection

For permanent solution check Inject USB + FixOwnership in Clovers config.plist

  <key>USB</key>
        <dict>
            <key>FixOwnership</key>
            <true/>
            <key>Inject</key>
            <true/>
        </dict>

 

[kkechan]

[Quote = "BreBo, de la publicación: 1520125, miembro de: 239040"] En la pantalla del trébol de arranque seleccione Opciones> dispositivos PCI> Propiedad USB y USB Inyección

Para comprobar Inyectar solución permanente USB + FixOwnership en tréboles config.plist

 <tecla> USB </ key>
        <Dict>
            <Tecla> FixOwnership </ key>
            <True />
            <Tecla> Inyectar </ key>
            <True />
        </ Dict> [/ code] [/ quote]
Gracias por todo lo que finalmente installed well all working i will upload tomorrow all my config.plist and kexts to help whoever have the same hardware