[Solved] Can't get Sierra installation screen with Gigabyte z150 Ultra Gaming

[golosin22]

Hi all,

First of all, my config:
Gigabyte z150 Ultra Gaming
2x8Gb Ballistic Sport LT
Intel 6700K
Wifi TP-Link WDN4800
HDD Seagate Barracuda 1TB

Last bios, with these options:
BIOS Features -> Fast Boot -> Disabled
-> Windows 8/10 Features -> Other OS
-> Storage Boot Option Control -> UEFI Only
-> Other PCI Device ROM Priority -> UEFI Only
Peripherals -> Legacy USB Support -> Enabled
-> XHCI Hand-off -> Enable
-> Super IO Configuration -> Serial Port 1 -> Disabled
Chipset -> VT-d -> Disabled

I see Clover screen, but whatever option I play with, screen shows ++++++ and then goes to sleep and some seconds later, the machine restarts.

I have tried with the Unibeat method. I also tried making a vanilla USA (create install media command on terminal + installing clover).

I see some guides here, where the people do it very easily, but I cannot get into the MacOS Installer.

Any help?

Thanks.

 

[BreBo]

@golosin22, please update your profile (personal details) with your build (Motherboard or Model, CPU and Graphics Card).

Profiles need to contain at least your primary system to assist others with helping you.

 

[golosin22]

Done!

 

[golosin22]

In verbose mode I get this:

 

[BreBo]

Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.
If that doesn't work, try using OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi.

 

[golosin22]

Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.
If that doesn't work, try using OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi.

That worked, but...

The screen goes black right after this (sorry for potato quality, but if moves very fast and it is the best the 240fps camera on the iPhone can do). I cannot see what it is...

Maybe removing the Wifi card?

Thanks again

 

[golosin22]

Updating: I AM STUPID.

When screen went black, I thought something was wrong.

Actually, I switched the monitor from DisplayPort to hdmi and the installer was there.

Thanks!