[Solved] Bluetooth of BCM94352HMB is not working

[hanconquer]

Hi, I bought a piece of BCM94532HMB and installed on my GA-H97N-Wifi.
Then, I followed this post:
https://www.tonymacx86.com/threads/broadcom-wifi-bluetooth-guide.242423/

The Wifi part:
I installed below 2 kext to /System/Library/Extension, with no extra patch, and Wifi is working now.
- FakePCIID.kext
- FakePCIID_Broadcom_WiFi.kext

The Bluetooth part:
I installed below 2 kext to /System/Library/Extension (also tried EFI/CLOVER/kexts/Other)
- BrcmFirmwareRepo.kext
- BrcmPatchRAM2.kext
However, Bluetooth is NOT working, no icon shown in System Preferences.
I also tried BrcmPatchRAM, BrcmNonPatchRAM, BrcmNonPatchRAM2, but no luck.


I put the "Problem Reporting" files including below items as the attachment.

1. Copy of IOReg
2. Screenshots
   • DPCIManager/Status
   • System Information/Hardware/Network/WiFi
   • System Information/Hardware/Bluetooth
   • System Information/Hardware/USB (Select Bluetooth device)
3. Clover (if installed)
   • EFI/CLOVER/config.plist
   • DPCIManager/Misc/Boot Log

Please help me, thanks.

 

[ashman70]

Did the card come with a cable that connects the card to USB pinouts on your motherboard?

 

[hanconquer]

Did the card come with a cable that connects the card to USB pinouts on your motherboard?

Nope.
It looks like BCM94352HMB

 

[ashman70]

Ah ok

 

[RehabMan]

Hi, I bought a piece of BCM94532HMB and installed on my GA-H97N-Wifi.
Then, I followed this post:
https://www.tonymacx86.com/threads/broadcom-wifi-bluetooth-guide.242423/

The Wifi part:
I installed below 2 kext to /System/Library/Extension, with no extra patch, and Wifi is working now.
- FakePCIID.kext
- FakePCIID_Broadcom_WiFi.kext

The Bluetooth part:
I installed below 2 kext to /System/Library/Extension (also tried EFI/CLOVER/kexts/Other)
- BrcmFirmwareRepo.kext
- BrcmPatchRAM2.kext
However, Bluetooth is NOT working, no icon shown in System Preferences.
I also tried BrcmPatchRAM, BrcmNonPatchRAM, BrcmNonPatchRAM2, but no luck.


I put the "Problem Reporting" files including below items as the attachment.

1. Copy of IOReg
2. Screenshots
   • DPCIManager/Status
   • System Information/Hardware/Network/WiFi
   • System Information/Hardware/Bluetooth
   • System Information/Hardware/USB (Select Bluetooth device)
3. Clover (if installed)
   • EFI/CLOVER/config.plist
   • DPCIManager/Misc/Boot Log

Please help me, thanks.

Might be USB configuration issue. Most people neglect to implement it properly.
See guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

 

[hanconquer]

Might be USB configuration issue. Most people neglect to implement it properly.
See guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

Hi RehabMan,
I believe I already made my USB configuration correct by following your guide.
Now each USB port is working like a charm.
Please kindly review the new attached file at post#1.

 

[hanconquer]

I found this old post:
https://www.tonymacx86.com/threads/bcm20702a0-bluetooth-not-working-in-sierra-10-12-6.230082/
It turns out my card (0a5c:22be) is not supported any more

However, I used BrcmBluetoothinjector.kext from RehabMan-BrcmPatchRAM-2015-0627.zip as mentioned in the post.
Finally my bluetooth is working now!!!